Setup; Profiles - Siemens S45i User Manual

Setup

Preparation of the phone for Internet
access depends on the service pro-
vider currently used:
• If the settings have already been
made by the service provider you
may begin immediately.
• If access profiles have already
been assigned by the service pro-
vider, select a profile and activate
it (page 43).
• The access profile must be set
and activated manually (page 43).
If necessary, check with your service
provider for details.

Profiles

You can set or change up to 5 access
profiles (may be barred by the serv-
ice provider). The entries and func-
tions may vary depending on your
service provider. You can change a
profile each time before you access
the Internet (page 44).
Profile settings
To create a new profile proceed as
follows:
f
§Menu§ Surf & fun
Profiles
V
Select the profile to be
changed.
§Edit§
The entry card is dis-
played.
V
Make your entries field
by field.
f f
Internet
WAP
You may get further information
on the entries from your service
provider.
Profile name
GPRS
and
WAP
parameters
§Save§
Special characters
(as in the SMS text editor)
*
#
0
0
*
Name the profile or rename a
default name.
CSD data
see page 81.
IP address:
Enter IP address.
Port:
Enter port number.
Homepage:
Enter homepage if not set by
the service provider.
Linger time:
Enter time in seconds after
which a connection should
be terminated if no input or
data transfer takes place.
The settings are stored
and the profile list is
shown.
Press 3 x for /
Press 3 x for @
Press for . (full stop)
Press repeatedly for
Press repeatedly for
43
:
~