You can set the tones that sound in
specific situations to suit your
particular tastes.
f
f
§Menu§
Audio
then select a function:
Ringer setting
Activate, deactivate the ringer or re-
duce it to a short beep and confirm
this as the basic setting.
)
Beep is activate.
&
Ringer is deactivated.
In standby mode: Activate and deactivate
the ringer for the current session:
*
Hold down.
Once the phone has been switched off and
on again and following use with the headset
or car kit, the basic setting becomes active
again.
Volume
B
Select the range:
All calls
d Calls
VIP calls
Alarm
Messages
Cell broadcast
B
Set volume.
§OK§
Confirm.
Displays rising volume.
If two separate phone numbers are regis-
tered for your phone, you can set different
volumes for them (page 77).
Audio
Silent alert
To avoid being disturbed by the ring-
er, you can activate the trembler in-
stead. It can also be active in addi-
tion to the ringer (e.g. in noisy
environments). The trembler is de-
activated when the battery is being
recharged.
Call screening
Only calls from numbers that are in
the Phonebook/Addressbook are
signalled audibly or by the trembler.
Other calls are merely displayed.
If you do not accept these calls, they
are diverted to your mailbox (if set,
page 51).
(
Information tones
Activate/deactivate all service tones
and alarm tones or use
activate/deactivate tones.
Key tones
Set the acoustic key tone:
Click
Tone
or
Displayed when
activated.
Extended
Silent
or
71
~
to