Safety Requirements; Revision Information; Explosion Protection Type; Warranty And Disclaimer - YOKOGAWA ADMAG TI Series User Manual

n EMC
• This product conforms to EN61326-1, EN61326-2-3,
EN61326-2-5, EN61000-3-2, and EN61000-3-3 (EMC
standard).
• Performance Specification during immunity test Flow
rate output: Output fluctuation within ±5% of default
(1 m/s) span
• This product conforms to the standard specifications
of CIP for EtherNet/IP communication.
CAUTION
This product is a Class A product in the IEC61326-1
(EMC standard). Operation of this product in a
residential area may cause radio interference, in
which case the user is required to take appropriate
measures to correct the interference.
n Safety Requirements
This product conforms to IEC safety class I (with
Protective grounding terminal), Installation Category
(Overvoltage Category) II, No Measurement Category
("O"(Other)), Micro Pollution degree 2, Macro Pollution
degree 4, Altitude at installation Site Max. 2000 m
above sea level.
The following models are conformed to EN61010-1,
EN61010-2-030 and CAN/CSA-C22.2 No.61010-1,
CAN/CSA-C22.2 No.61010-2-30.
Product
Integral
Flowmeter
Remote
Sensor
Remote
Transmitter
n Explosion Protection Type
NOTE
For explosion protection type, be sure to read the
applicable user's manual.
n Warranty and Disclaimer
• Except as specified in the warranty terms,
YOKOGAWA shall not provide any warranty for the
product.
• YOKOGAWA shall not be liable for any indirect or
consequential loss incurred by either using or not
being able to use the product.
n Trademarks:
• All the brands or names of Yokogawa Electric's
products used in this manual are either trademarks
or registered trademarks of Yokogawa Electric
Corporation.
• All other company and product names mentioned
in this manual are trade names, trademarks or
registered trademarks of their respective companies.
• In this manual, trademarks or registered trademarks
are not marked with ™ or
All Rights Reserved, Copyright © 2017. Yokogawa Electric Corporation
Model Size
AXG### 2.5 to 400 mm
AXW### 25 to 1000 mm
AXG### 2.5 to 500 mm
AXW### 25 to 1000 mm
AXG4A -
AXW4A -
AXG1A -
.
®
n Revision Information
Title: ADMAG TI Series
AXG###, AXW###, AXG4A, AXW4A, AXG1A
Magnetic Flowmeter
Read Me First
Manual No.: IM 01E21A21-01Z1
Edition Date Page
1st June 2017 –
2nd Oct. 2018 –
3rd Oct. 2018 –
4th July 2019 –
5th Oct. 2019 –
6th Dec. 2019 –
7th Nov. 2020 –
8th May 2021 –
9th Sep. 2021 –
10th Dec. 2021 –
11th Feb. 2022 –
12th Apr. 2022 –
Revised Item
New Publication
Added Ex-proof spec.
Added Modbus spec.
Added AXG1A, F
OUNDATION
fieldbus
Added FM (USA) Explosion
Protection Type
Added FM (Canada)Explosion
Protection Type
Revise document number
and title of BRAIN, HART
communication type.
Added PROFIBUS PA
communication type.
Added document number
and title for Pulp & Paper
application
Added document number and
title for Marine Approval Type
Safety Requirements of
AXG500 added
Fixing the title
Added EtherNet/IP
communication type.
IM 01E21A21-01Z1
6