Waterdrop WD-TK User Manual

Waterdrop WD-TK User Manual

Gravity-fed water filter system
Hide thumbs Also See for WD-TK:

Advertisement

Quick Links

Read this manual before using and keep it for future reference.
King Tank
Gravity-Fed Water Filter System
User Manual
System Model List
WD-TK
WD-TK-F
WD-TK-S
WD-TK-FS
SUS
304
Stainless
Steel

Advertisement

Table of Contents
loading

Summary of Contents for Waterdrop WD-TK

  • Page 1 Read this manual before using and keep it for future reference. King Tank Gravity-Fed Water Filter System User Manual System Model List WD-TK WD-TK-F Stainless WD-TK-S WD-TK-FS Steel...
  • Page 2: Product Overview

    Product Overview WD-TK WD-TK-F WD-TK-S WD-TK-FS...
  • Page 3: Parts List

    11. Spigot Hex Nut 12. Stand 16. Flat Washer * 1,3 and 4 have been pre-assembled together; 5, 7 and 8 have been pre-assembled together; 11, 15 and 16 have been pre-assembled together. WD-TK WD-TK-F WD-TK-S WD-TK-FS Items Lower Chamber...
  • Page 4: Product Speci Cations

    (Do not clean the carbon lter and the uoride lter to ensure that it will not be polluted during the assembly process). Product Speci cations System Model WD-TK/WD-TK-F/WD-TK-S/WD-TK-FS Carbon Filter Capacity Up to 6,000 gallons in total Fluoride Filter Capacity...
  • Page 5 5. Carbon Filter Figure 3 Fluoride Filter * (Only applicable to WD-TK-F/WD-TK-FS) “Attach the Fluoride Filter (9) to the water outlet of your faucet to make a tight seal by means of the Priming Washer(14), and ush the Fluoride Filter (9) for at least 120 seconds or until the water runs clear. ” (Figure 4) 14.
  • Page 6 Step 5 - Upper and Lower Chamber Assembly * (* denotes optional) Place the upper chamber (6) gently into the lower chamber (10), and put the lid on the upper chamber, and put the lower chamber the Stand (12). The Stand (12) is only applicable to WD-TK-S/WD-TK-FS. (Figure 7) Figure 7 6.
  • Page 7: Operation And Use Tips

    Operation and Use Tips 1. Ensure that the spigot (15) is in the closed position during the rst time operation and after each re-priming. 2. The red ball in the water level tube indicates the height of the water level in the lower chamber. Add water into the upper chamber according to the height of the oating ball.
  • Page 8: Warranty

    NOTE: This does NOT apply to any lter cartridge, as the life expectancy varies based on incoming water quality. Manufacturer Technical Support Tel: 1-888-352-3558 (U.S.) Made in China V041 E-mail: service@waterdrop lter.com Qingdao Ecopure Filter Co., Ltd.

This manual is also suitable for:

Wd-tk-fWd-tk-sWd-tk-fs

Table of Contents