Waterdrop WD-D6-B Instruction Manual
  1. Manuals
  2. Brands
  3. Waterdrop Manuals
  4. Water Filtration Systems
  5. WD-D6-B
  6. Instruction manual

Waterdrop WD-D6-B Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Waterdrop WD-D6-B

Summary of Contents for Waterdrop WD-D6-B

  • Page 3 Find the installation video Search “Waterdrop D6 RO installation” on Register 1-year manufacturer warranty* Visit warranty.waterdropfilter.com and enter the product serial number. The serial number is the last 7 digits of the barcode on the rear cover and packaging box.

  • Page 5: Table Of Contents

    Contents Installation Instructions Before Installation ··································································1 Product Introduction ·······························································2 Installation Tips ·········································································4 Installation Steps ····································································5 ···············································5 Step 1: Install the Feed Water Adapter ·································································6 Step 2: Install the Faucet ························································7 Step 3: Install the Drain Saddle ············································7 Step 4: Position the RO System Housing ································································8 Step 5: Connect Tubing ·············································9...

  • Page 6: Installation Instructions

    Installation Instructions Before Installation Product Specifications To achieve the optimal performance, it is highly recommended to use the system within the operational parameters. Model Number WD-D6-B 1,000 gallons Total Filtration Capacity Rated Voltage/Frequency 110~120V/60Hz Rated Power Service Flow Rate 0.42 gal/min...

  • Page 7: Product Introduction

    Product Introduction Product Overview Fist Integral Composite Filter System Housing Front Cover Control Panel Parts List Blue 1/4" PE Tubing Red 1/4" PE Tubing White 1/4" PE Tubing X 79" X 79" X 79" Smart Digital Feed Water Adapter Drain Saddle Lock Clip Faucet 3/8"...
  • Page 8 Control Panel Filter Life Indicator Filter Reset Button Power Indicator Power Button Inlet Water Port Outlet Water Port Drain Port Smart Digital Faucet Kitchen Faucet Feed Water Outlet Water Adapter Tubing Inlet Water Tubing Drain Tubing Faucet Power Cord Cold Power...

  • Page 9: Installation Tips

    Installation Tips How to Use the Quick-Connect Fittings To connect: 1. There is an existing mark (Figure 1) Mark for at the end of the tubing that you can Full Insert use to confirm whether the tubing is fully inserted into the fitting. Push the tubing into the fitting until you reach the mark on the tubing.

  • Page 10: Installation Steps

    6. Once breaking through the surface, swirl the drill a little to apply pressure in a circle evenly. Installation Steps D6 RO Prior to installation, it is highly recommended to watch the video “Waterdrop installation ” on NOTE: • Before installation, remove the RO system from the box and choose an easy- to-access area under the sink to place it.

  • Page 11: Step 2: Install The Faucet

    3/8" 1/2" Cold Water Pipe Cold Water Pipe Screw Washer Feed Water Adapter Converter 1/4'' Inlnet Water Tubing Cold Water Unscrew Supply Valve Figure 4 Figure 5 Step 2: Install the Faucet NOTE: If there is no hole in your kitchen sink or countertop, you have to drill one (1⅜") Faucet Spout or use the hole in the soap...

  • Page 12: Step 3: Install The Drain Saddle

    Step 3: Install the Drain Saddle 1. Stick the foam seal on the front plate of the drain saddle. Ensure that the hole of the foam seal is aligned with the hole of the front plate (Figure 6). Choose a spot on the drainpipe that is convenient for installing the drain saddle.

  • Page 13: Step 5: Connect Tubing

    Step 5: Connect Tubing NOTE: • Confirm the tubing length you need first. Then cut the tubing if it is too long, referring to “How to Use the Quick-Connect Fittings” on page 4. • Before connecting the PE tubing to the system, remove the plug from the water port.

  • Page 14: Step 6: Connect The Faucet Power Cord

    Drain Saddle Drain Tubing Lock Clip Drain Tubing Drain Port Step 6: Connect the Faucet Power Cord Connect the faucet to the system: Insert the power cord which is attached to the RO faucet into the connector at the back of the housing. Faucet Connector System Connector Step 7:...
  • Page 15 sure there are no leaks at the joints, fittings, valves, or tubing connections. • The water will be undrinkable during the flushing process. The water might appear black at first. • You will need to do the timekeeping for the 20-minute flushing yourself. Note that when the system continuously works for over 40 minutes, it will enter timeout protection mode.

  • Page 16: Owner's Manual

    Owner’s Manual Display and Operation Section 1: Control Panel Display Filter Life Indicator Filter Reset Button Power Indicator Power Button • Powering on mode: The filter life indicator flashes 5 times. • Standby/Dispensing water mode: The filter life indicator stays on. When the filter expires, the filter life indicator flashes.
  • Page 17 Check the power cord of the faucet to see whether it is plugged in. If not, plug it in. Check on whether the power cord is damaged. If so, please contact Waterdrop customer service. • E6: When the system continuously works for over 40 minutes, it will enter timeout protection mode.

  • Page 18: Section 3: Filter Life Reminder

    NOTE: You will need to unplug the power and plug it in again. If the problem has not been resolved, please contact Waterdrop customer service. Section 3: Filter Life Reminder Fist Integral Composite Filter has a service life of 12 months. Please replace the filter when the situation shown in the figure occurs.

  • Page 19: Precautions

    5. After replacing the filter, press the power button for 3 seconds. The indicator light will be on and you will hear a “ding” sound. (Note: The system will automatically flush for 25 seconds, and the reset button and power button will flash alternately.
  • Page 20 • Make sure all tubing is fully inserted to the point where you reach the mark on the tubing. • Use only authorized WD-D6-B parts and filters. • Check the tightness of the feed water adapter and make sure there is no water leakage.

  • Page 21: Troubleshooting

    Troubleshooting • The System Cannot Be Powered on After You Insert the Power Plug a. Check the power under the sink, as this occurs primarily when the power under the sink is powered off. Also, check the connection between the power plug and the power outlet to ensure that the system has been correctly plugged into the power outlet.

  • Page 22: Limited Product Warranty

    • The System Hasn’t Been Used in a While a. Deposits in the tubing may block the filter. Before using the system, turn on the regular tap and allow the water to run for a while. Turn on the filtered water faucet and flush the system.
  • Page 23 specifications, or standards is provided solely for your convenience. The quality of water supplies may vary seasonably or over a period of time. Your water usage may vary as well. The manufacturer shall assume no liability for the determination of the proper equipment necessary to meet your requirements, and we do not authorize others to assume such obligation on our behalf.

Table of Contents