Related Manuals for Waterdrop N1
Summary of Contents for Waterdrop N1
- Page 1 Countertop Reverse Osmosis Water Filtration System Instruction Manual service@waterdrop lter. com 1-888-352-3558 Mon-Fri 8:00 AM-5:00 PM (PST) www.waterdrop lter.com (live chat available)
- Page 2 Find the installation video Search "Waterdrop N1 Countertop RO Installation“ on Register 1-year manufacturer warranty* Visit warranty.waterdropfilter.com and enter the product serial number. Any questions, please contact Waterdrop by live chat: www.waterdropfilter.com by phone: 1-888-352-3558 Mon-Fri 8:00 AM-5:00 PM (PST) or by Email: service@waterdropfilter.com...
- Page 3 Contents Installation Instructions Owner’s Manual...
- Page 4 Installation Instructions Before Installation Inspect the Package Specifications Note...
-
Page 5: Product Introduction
Product Introduction... -
Page 6: Installation Steps
Installation Steps Prior to installation, it is highly recommended to watch the video “Waterdrop N1 Countertop RO Installation” on Step 1: Take out the machine and place it on the countertop. Install the drip tray. Step 2: Remove the tank cover, hold the machine with one hand, and take out the feed water tank with the other hand. - Page 9 Display and Operation Section 1: Dispense Water (How to Dispense Water) Capacity adjustment There are 4 capacity options (4 OZ, 8 OZ, 16 OZ, and Manual). Touch the Volume button to choose the capacity you need. 4 OZ 8 OZ Manual 4 OZ 16 OZ...
- Page 10 Section 3: Standby Mode and Sleep Mode Standby mode Sleep mode ● Sleep mode: After 120 hours of no use, the machine will enter the sleep state and all lights go out. ● Wake up sleep mode: Touch any button (“ ”...
- Page 11 ● Manual flushing: Because the machine has not been used for a long time, the water stored in the purified water tank should be drained and replaced with fresh water before use. After that, the “ ” indicator light will Flush flash constantly.
- Page 12 NOTE: Filter life may vary depending on source water quality and water usage. Please replace the filters according to the reminder of the filter life indicator light. There are helpful “ ” & “ ” filter life indicator light on the front panel that will notify you to perform routine filter replacement by color change.
- Page 13 b. How to reset the filter life indicator light (resetting the CF filter life indicator light, for example): Note: The filter life reset of MRO is the same as the reset of CF.
- Page 14 c. How to flush the filter after replacement: For CF filter: For MRO filter:...
-
Page 15: System Maintenance
Section 6: Malfunction Display Timeout protection System Maintenance Floating ball silicone cover Floating ball Filter screen... -
Page 16: Troubleshooting
Troubleshooting 1. Why is the TDS value in the feed water tank higher than that of the added tap water? - Page 17 2. When the machine filters water, the TDS value in the feed water tank is always changing. When the machine filters water, the recycled concentrated water continuously enters the feed water tank and the TDS value of the concentrated water is changing, resulting in continual changes in the TDS value after the concentrated water is mixed with the raw water.
- Page 18 If the circuit board is disconnected, please contact our customer service hotline by live chat: www.waterdropfilter.com; by phone: 1-888-352-3558 Mon-Fri 8:00 AM-5:00 PM (PST) or by email: service@waterdropfilter.com.
-
Page 19: Limited Product Warranty
Limited Product Warranty Any information or suggestion with respect to our product concerning applications, specifications or standards is provided solely for your convenience. -
Page 20: Warranty Registration
Warranty Registration How to Contact Us service@waterdrop lter.com 1-888-352-3558 Mon-Fri 8:00 AM-5:00 PM (PST) www.waterdrop lter.com (live chat available) - Page 21 1-888-352-3558 Mon-Fri 8:00 AM-5:00 PM (PST) www.waterdrop lter.com (live chat available) Made in China V002...