Removing The Engine Guard; Installing The Engine Guard - Husqvarna FC 250 Rockstar Edition 2022 Owner's Manual

11.7

Removing the engine guard

11.8

Installing the engine guard

SERVICE WORK ON THE CHASSIS 11
–
Remove screws
–
Remove screws
F03638-10
–
Position the engine guard on the frame.
–
Mount screws
Guideline
Remaining screws,
chassis
–
Mount screws
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
F03638-11
1
with the bushings.
2
. Take off the engine guard.
1
, but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
2
with bushings, but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
51