Table of Contents
Advertisement
8.6
Starting off
–
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle
carefully.
8.7
Quickshifter
8.8
Activating the quickshifter
–
Check lock button
–
Bend over the handlebars while sitting on the motorcycle.
Grip the rim and compress the fork. Press lock button
and decompress slowly until the lock button engages in lock
2
ring
.
When the fork compresses for the first time, the lock but-
ton is released automatically.
H04999-10
When the quickshifter is activated, you can shift up without actu-
ating the clutch.
Info
The quickshifter is not activated when shifting up from
first to second gear, and the clutch lever must be used
when shifting up instead.
Even if the quickshifter is activated, you need to use the
clutch lever to shift down.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quickshifter uses the shifter shaft position to check whether
or not a shift should be initiated, and sends a corresponding sig-
nal to the engine control.
If the quickshifter is deactivated, the clutch needs to be actuated
in the normal way for each shift.
F03643-10
–
Press the QS button
The QS indicator lamp lights up when the quickshifter is
activated.
Info
The quickshifter is not activated when shifting up from
first to second gear, and the clutch lever must be used
when shifting up instead.
Even if the quickshifter is activated, you need to use
the clutch lever to shift down.
F03760-12
RIDING INSTRUCTIONS 8
1
to ensure it can move easily.
1
to switch the quickshifter on or off.
1
29
Advertisement
Table of Contents
