Pars ABL GIANT 3.0 Manual page 50

SETTINGS
ADJUSTMENT OF CONVEYOR BELT
Proper tension of conveyor belt is necessary to get long service life, it is important that the
belt runs in the middle of the rollers. Adjustment is made as follows
- Start the conveyor
- Stand on a ladder or the truck platform
- Loosen the four bolts (A) on each side
- Loosen the nut (B) on each side
- Adjust the nuts (C) on each side until the belt is the centre of the rollers
- Tighten nuts (B) on each side
- Tighten the four bolts (A) on each side
- If needed do the same procedure on the other side (D) on the conveyor
50