Pars ABL GIANT 3.0 Manual page 25

LUBRICATION AND MAINTENANCE INTERVAL SCHEDULE
8 Hours service or if needed after daily inspection
These following points should be lubricated
- Lower elevator shaft (A) right and left bearing
- Upper elevator shaft (B) right and left bearing
- Centre brush bearing (C) left side
- Centre brush bracket (C) right and left side
- Conveyor drive rollers (D) right and left bearing
- Side brush sliding axle (E) right and left side
- Collector shoe (F) bushing right and left side bolts
- Drawbar (G)
8 hours service / inspection should return at intervals of 8 hours
25