Pars ABL GIANT 3.0 Manual page 49

SETTINGS
ADJUSTMENT OF ELEVATOR BELT
Proper tension of elevator belt is necessary to get a long service life
- Loosen the four nuts (A) on each side
- Loosen the nut (B) on each side
- Tighten the belts by adjusting nut (C) equally on both side
- The belt tension is ok when the alu rake (C) can be moved about 50 mm down the
middle of the elevator
- Tighten the nuts (B), (C) again on both side
Always stretch equally on both sides, so that the upper axle is parallel to the bottom
plate
49