Pars ABL GIANT 3.0 Manual page 42

COLLECTOR SHOES
REPLACEMENT OF COLLECTOR SHOES RUBBER
Collector shoes prevent the stones from falling out on the side of the centre brush and
prevent getting stripes behind the machine. Therefore, is it important that the rubber on the
shoes lie against the ground, and that the shoes seal against the centre brush on both sides
of centre brush.
- Unscrew the bolt (A) and remove the collector shoe
- Unscrew the bolts (B) remove the rubber (C)
- Replace with new rubber (C)
- Check bushing (D) and the bolt (A) if needed replace the bushing and the bolts
- Assembly the shoes again
42