Memory Transmission - Sharp UX-P115 Operation Manual

Sending a Fax From Memory
6
When you are ready to begin transmission, press
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
locations are marked "Busy" or have a communication error code. If so,
send the document to those locations again.

Memory transmission

You can also send a fax through memory when sending to a single location.
This is convenient when sending to locations where the line is often busy, as it
saves you from waiting to pick up the original document and frees the feeder
for other operations.
To send a fax through memory, load the document, press
then dial using one of the following methods:
♦
Press the number keys to enter the fax number and then press
♦
SPEED
Press , enter a 2-digit Speed Dial number, and press
♦
Press repeatedly to select an auto-dial number and then press
♦
Press once to select the last number dialed and then press
38
START/MEMORY
.
START/MEMORY
, and
START/MEMORY
.
START/MEMORY
.
START/MEMORY
.
START/MEMORY
.