Sharp UX-P115 Operation Manual page 57

4
Press a number from 1 to 3 (1 to 5 in Canada) to select the ring pattern
below that matches your second number's ring pattern. Or, press 6 to
have your fax automatically answer your normal telephone number.
Press 7 to turn off the distinctive ring function.
RING PATTERN 1
1
RING PATTERN 2
2
RING PATTERN 3
3
RING PATTERN 4
4
(Canada only)
RING PATTERN 5
5
(Canada only)
STANDARD RING
6
OFF SETTING
7
STOP
5
Press to return to the date and time display.
6
Set the reception mode to FAX.
♦
When using distinctive ring, you must set the reception mode of your fax to
FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that other
devices on the same line will also ring until your fax answers. If one of your
other numbers is dialed, the fax will ring; however, it will not answer.
Distinctive Ring (Requires Subscription to Service)
Two short rings.
One short, one long, and one short ring.
Two short rings and one long ring.
Three very short rings.
Two very short rings.
Your standard (normal) ring pattern.
Turn distinctive ring off.
The display briefly shows
your selection, then:
RESOLUTION/
RECEPTION MODE
FAX SIGNAL RX
TEL FAX
55