Connections - Sharp UX-P115 Operation Manual

Connections

Connecting the handset
Connect the handset as shown and place it on the handset rest.
♦
The ends of the handset cord are identical, so they will go into either jack.
Make sure the handset
cord goes into the jack
marked with a handset
symbol on the side of
the machine!
Connecting the power cord
Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong) outlet.
Caution!
Do not plug the power cord into any other kind of outlet. This will damage the
machine and is not covered under the warranty.
The machine does not
have a power on/off
switch, so the power is
turned on and off by
simply plugging in or
unplugging the power
cord.
Use the handset to make ordinary phone calls,
or to transmit and receive faxes manually.
Connections
9