Sending A Fax By Automatic Dialing - Sharp UX-P115 Operation Manual

Sending a Fax by Automatic Dialing

5
When you hear the fax tone, press
•
If the transmission is completed successfully, the fax will beep once.
•
If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 59).
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 71. (This may
occur if the other fax machine doesn't respond properly when you attempt to
send the document.)
Sending a Fax by Automatic Dialing
You can store up to 30 fax or phone numbers in the machine for automatic
dialing. When you store a number, you select a two-digit Speed Dial number
for it.
♦
Auto-dial numbers are dialed by pressing
Speed Dial number, and then pressing
♦
You can also search for an auto-dial number by pressing
When the desired number appears in the display, press
it.
28
START/MEMORY
. Replace the handset.
SPEED
, entering the two-digit
START/MEMORY
.
START/MEMORY
or .
to dial