Adjusting The Resolution And Contrast - Sharp UX-P115 Operation Manual

3
Adjust the resolution and/or contrast settings as explained in
Resolution and Contrast below, then dial the receiving machine as
explained on page 27.

Adjusting the Resolution and Contrast

If desired, you can adjust the resolution and contrast before sending a
document.
The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
STANDARD
FINE
SUPER FINE
HALF TONE
Adjusting the Resolution and Contrast
You must adjust the
settings each time
you don't want to use
the default settings.
Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
Use FINE for documents containing small letters
or fine drawings.
Use SUPER FINE for documents containing
very small letters or very fine drawings.
Use HALF TONE for photographs and
illustrations. The original will be reproduced in
64 shades of gray.
25