Answering With The Fax's Handset - Sharp UX-P115 Operation Manual

Using TEL Mode

Answering with the fax's handset

Important: If a document is loaded in the machine's feeder, remove it before
performing the steps below. (Fax reception is not possible when a document
is in the feeder.)
1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.
3
If the other party first speaks with you
and then wants to send a fax, press
START/MEMORY
after speaking. (Press
before the sender presses their Start
key.)
•
When RECEIVING appears in the
display, hang up.
42
Beep
If RECEIVING does not appear (or if you have set
the Fax Signal Receive setting to NO), press
START/MEMORY
to begin reception.
START/MEMORY
RECEIVING
RECEIVING