How To Connect Using The Serial Connection - Magtek DynaFlex Manual

Hide thumbs Also See for DynaFlex:

Table of Contents

2 - How to Connect to Devices

2.2

How to Connect Using the Serial Connection

1) For best results, use the cable that is included with the device.

2) Connect the USB-C end of the cable to the DynaProx device and the other end to the PC. This cable

is for powering the device.

3) Connect the 6-pin header end of the Serial cable to the DynaProx device and the other end to the PC

Com port. This cable is for communicating with the device as a COM port. A USB to Serial adapter

cable may be used if the PC is not equipped with a COM port.

4) Launch the DynaFlex/DynaProx Utility BCR and select a

press the connect button.

5) The

Log Messages

6) To disconnect the device, press the

DynaFlex, DynaProx| Utility BCR | Manual ( Windows )

shows the status of the connection.

Disconnect

Page 12 of 16 (D100005916-10)

Serial DynaProx

button.

device in the list, then

Table of Contents

Do you have a question about the DynaFlex and is the answer not in the manual?

Dynaprox