Related Manuals for Server BP-1 88574
Summary of Contents for Server BP-1 88574
- Page 1 Smart Dispenser ™ BP-1 Used with SIG cartons up to 48 oz. MODEL: BP-1 88574 Thank You ...for purchasing our Smart Dispenser. This quality, NSF listed pump is a smart alternative to disposable pumps. SERVE UP FRESH, CONSISTENT PORTIONS...
- Page 2 88574 SMART DISPENSER ™ BP-1 PUMP DELIVERS 1 OZ PORTIONS 88575 To reduce portion, add PUMP GAGING COLLAR(S) LOCKING COLLAR 88313 Small collar: 1/8 oz reduction 88204 Medium collar: 1/4 oz reduction 88409 88205 Large collar: 1/2 oz reduction 88303 STOP COLLAR HEAD ASSEMBLY...
-
Page 3: Quick Start
WASH ALL PARTS QUICK START PROPERLY BEFORE USE. See page 6. INSERT SPRING INTO PUMP Remove spring from inside base in packaging. Insert cylinder into lid. Screw threaded cap. Insert spring into cylinder. Insert pump head assembly into cylinder. Screw locking collar to lid. PLACE PRODUCT CARTON INTO BASE INSERT PUMP... -
Page 4: Pump Assembly
WASH ALL PARTS PROPERLY PUMP ASSEMBLY BEFORE USE. See page 6. INSTALL SEAL INSTALL SEAL onto head assembly piston. onto head assembly piston. Apply small amount of food Apply small amount of food equipment lubricant inside seal. equipment lubricant inside seal. TIP: Side of seal marked TIP: Side of seal marked “INSERT PISTON THIS SIDE”... - Page 5 INSTALL HEAD ASSEMBLY INTO CYLINDER Apply a small amount of food equipment lubricant to the outside of seal. Slide locking collar down onto cylinder threading. Tighten firmly to secure head assembly to cylinder. SECURE PUMP TO LID Insert pump into lid. Tighten cap very firmly onto lid threading.
-
Page 6: Pump Cleaning
CLEANING It is important to clean, rinse, sanitize, and fully Clean the shell and lid by hand washing only. dry all parts regularly and properly. • Do not place any parts of this unit under, in, or near high heat, as this can melt the plastic. •... - Page 7 Be aware of the product you are serving and the NSF International lists this pump as: temperature the product is required to maintain. Server “Not acceptable for dispensing potentially Products, Inc. cannot be responsible for the serving of hazardous foods.”...
-
Page 8: Troubleshooting
Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number. Service is extremely prompt. Typically, units are repaired Server Products equipment is backed by a and ship out within 48 hours of receipt.
Need help?
Do you have a question about the BP-1 88574 and is the answer not in the manual?
Questions and answers