How Parameters Work - Casio WK-3000 User Manual

How Parameters Work

The following are the parameters whose settings can be
changed in the Parameter Edit Mode.
Tone Parameters
I Tone
(Range: 000 to 803, Drawbar organ tones 000 to 199)
This parameter controls the tones assigned to each part.
Anytime the tone is on the display, you can use the TONE
button or DRAWBAR ORGAN button and then select a
different tone, if you want.
G r a n d P n o
I Part On/Off (Settings: on, oFF)
This parameter can be used to turn each part on (sounds)
and off (does not sound). The current on/off status of each
part is indicated on the display as described below.
C h a n n e l
I Volume (Range: 000 to 127)
This is the parameter that controls the volume of the selected
channel.
V o l ume
I Pan Pot (Range: –64 to 00 to +63)
This parameter controls the pan pot, which is the center point
of the left and right stereo channels. Setting "00" specifies
center, a value less than "00" moves the point left, and a value
greater than "00" moves it right.
P a n
735A-E-051A
WK3100_e_47-58.p65 49
Mixer Function
I Octave Shift (Range: –2 to 0 to +2)
You can use octave shift to shift the range of the tone up or
down. When using the piccolo tone, there may be cases when
very high notes you want to play are not included within the
range of the keyboard. When this happens, you can use octave
shift to shift the keyboard range one octave up.
O c t S h i f t
–2 : Range shifted two octaves down.
–1 : Range shifted one octave down.
0 : No shift
+1 : Range shifted one octave up.
+2 : Range shifted two octaves up.
Tuning Parameters
You can use these parameters to tune each of the parts
individually.
I Coarse Tune (Range: –24 to 00 to +24)
This parameter controls the coarse tuning of the selected
channel's pitch in semitone units.
C . T u n e
I Fine Tune (Range: –99 to 00 to +99)
This parameter controls the fine tuning of the selected
channel's pitch in cent units.
F i n e T u n e
04.3.26, 0:11 PM
E-49