Casio CTK-6200 User Manual
  1. Manuals
  2. Brands
  3. Casio Manuals
  4. Electronic Keyboard
  5. CTK-6200
  6. User manual

Casio CTK-6200 User Manual

Hide thumbs Also See for CTK-6200:
Table of Contents

Advertisement

Quick Links

CTK - 6200
WK - 6600
USER'S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the keyboard, be sure to read the
separate "Safety Precautions".
CTK6200/WK6600E1A
E

Advertisement

Table of Contents
loading

Related Manuals for Casio CTK-6200

Summary of Contents for Casio CTK-6200

  • Page 1 CTK - 6200 WK - 6600 USER’S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the keyboard, be sure to read the separate “Safety Precautions”. CTK6200/WK6600E1A...

  • Page 2: Declaration Of Conformity

    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Declaration of Conformity Model Number: CTK-6200/WK-6600 Trade Name: CASIO COMPUTER CO., LTD. Responsible party: CASIO AMERICA, INC. Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801 Telephone number: 973-361-5400...
  • Page 3 ● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.

  • Page 4: Table Of Contents

    Contents General Guide ......E-4 Applying Effects to a Sound ..E-32 Reading the Display ...........E-6 Configuration of Effects........E-32 Modes..............E-7 Selecting an Effect ........... E-34 Menus..............E-7 Creating a User DSP ........E-36 , Precautions while “Please Wait” is Using the Mixer ......E-38 displayed ............E-7 Saving Settings ..........E-8 Mixer Overview ..........
  • Page 5 Contents Using a Memory Card..... E-101 Loading and Removing a Memory Card..E-102 Entering the Card Mode .........E-102 Formatting a Memory Card......E-102 Saving Digital Keyboard Data to a Memory Card..........E-103 Loading Data from a Memory Card ....E-105 To delete a file from a memory card....E-106 To rename a file on a memory card....E-106 Playing a Music File from a Memory Card..E-107 Connecting to a Computer ..

  • Page 6: General Guide

    General Guide • Illustrations in this User’s Guide show the WK-6600. L-1 - L-17 C-1 - C-13 Dial T-1 - T-9 R-1 - R-20 Back...
  • Page 7 General Guide • In this manual, the term “Digital Keyboard” refers to the CTK-6200/WK-6600. • This manual uses the numbers and names below to refer to buttons and controllers. • The following explains the meanings of the # and $ symbols that appear on the product console and with the key names below.

  • Page 8: Reading The Display

    General Guide Tempo, measure, beat area Reading the Display Tempo is shown as the current setting value, as beats per minute. Auto Accompaniment, the metronome (page This section explains the contents of the Digital Keyboard’s E-19), and other playback is performed at the tempo display screen.

  • Page 9: Modes

    General Guide Modes Menus Your Digital Keyboard has three modes: a rhythm mode, a You can use the same operations to display mode and card mode, and a song sequencer mode. The currently function specific menus. To display a menu, hold down the selected mode is shown as an indicator on the display.

  • Page 10: Saving Settings

    General Guide Saving Settings Your Digital Keyboard is equipped with a song sequencer and other features that you can use to store data you create. This stored data is retained even when the Digital Keyboard is turned off. However, the tone, rhythm, and other settings you configure on the Digital Keyboard’s console normally are returned to their initial power on defaults whenever you turn off power.

  • Page 11: Getting Ready To Play

    Getting Ready to Play Using a Household Power Outlet Preparing the Music Stand Make sure that you use only the AC adaptor (JEITA Standard, with unified polarity plug) specified for this product. Use of a different type of AC adaptor can cause malfunction. Music stand Specified AC Adaptor: AD-A12150LW Use the supplied power cord to connect the AC adaptor as...

  • Page 12: Using Batteries

    Getting Ready to Play ■ Low Battery Indication Using Batteries The following shows the approximate battery life. You can use six D-size batteries for power. 4 hours on alkaline batteries • Use alkaline or zinc-carbon batteries. * The above values are standard battery life at normal Never use oxyride or any other nickel based batteries.

  • Page 13: Connections

    Connections Connecting Headphones Connecting a Microphone (WK-6600 only) Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night You can connect a dynamic microphone (only) to the Digital without disturbing others. Keyboard for output thorough the Digital Keyboard’s •...

  • Page 14: Connecting Audio Equipment Or An Amplifier

    RIGHT (Red) • You can get information about accessories that are sold Pin plug separately for this product from the CASIO catalog available from your retailer, and from the CASIO website at the following URL. Outputting Keyboard Notes to Audio http://world.casio.com/...

  • Page 15: Selecting And Playing A Tone

    Selecting and Playing a Tone R-1 - R-12 R-1 - R-12 R-14 R-14 L-13 L-13 L-17 L-17 R-19 R-19 L-14 L-14 L-16 L-16 R-20 R-20 To turn on Digital Keyboard power • If you press the L-1 (POWER) button only lightly, the Rotate the L-2 (VOLUME) knob towards MIN to display will light up momentarily but power will not turn set the volume to a low level.

  • Page 16: Listening To Demo Tunes

    Selecting and Playing a Tone ■ To disable Auto Power Off Selecting a Tone While the Digital Keyboard is turned on, press The tones of this Digital Keyboard are divided among groups, the L-1 (POWER) button to turn it off. each of which corresponds to one of the 12 TONE buttons.

  • Page 17: Layering And Splitting Tones

    Selecting and Playing a Tone Now you can play on the keyboard using the • Three tones, two layered tones for the right range and one tone for the left range of the keyboard (page E-17) tone you selected. This configuration uses the UPPER 1 part, UPPER 2 part, and LOWER part (Layer: On, Split: On).
  • Page 18 Selecting and Playing a Tone R-15 R-15 R-16 R-16 R-17 R-17 R-14 R-14 L-10 L-10 R-13 R-13 L-11 L-11 R-19 R-19 R-18 R-18 R-20 R-20 To layer two tones To split the keyboard between two tones Refer to the separate “Appendix” to look up the Refer to the separate “Appendix”...
  • Page 19 Selecting and Playing a Tone To specify the keyboard split point To use layer and split together While holding down the R-19 (SPLIT) button, Perform steps 1 through 6 of the procedure press the keyboard key that you want to be the under “To layer two tones”...

  • Page 20: Raising And Lowering Keyboard Tuning (Transpose

    Selecting and Playing a Tone Raising and Lowering Keyboard Using Octave Shift Tuning (Transpose) You can use octave shift to individually change the octave of the UPPER 1, UPPER 2, and LOWER parts. You can use The transpose feature lets you raise or lower the overall octave shift to raise or lower the octave of a song, to assign tuning of the keyboard in semitone steps.

  • Page 21: Using The Metronome

    Selecting and Playing a Tone To change the tempo setting Using the Metronome There are two different methods you can use to change the Press the L-9 (METRONOME) button. tempo setting: using the TEMPO buttons or tapping a beat with a button. ■...

  • Page 22: Using The Pitch Bend Wheel

    Selecting and Playing a Tone ■ To adjust the tempo by tapping a beat Using the Pitch Bend Wheel While holding down the R-13 (FUNCTION) The PITCH BEND wheel (S-1) lets you change the pitch of button, tap the L-11 (TAP) button four times at notes you are playing by rotating the wheel forward or back.

  • Page 23: Selecting A Temperament And Fine Tuning Its Scale

    Selecting and Playing a Tone Use the dial or the R-14 (–, +) buttons to select a Selecting a Temperament and temperament. Fine Tuning Its Scale • Selecting a temperament other than 01: Equal will cause the C indicator to appear on the display. Use the scale function to select one of the 17 preset •...
  • Page 24 Selecting and Playing a Tone When you are finished, press the R-15 (EXIT) When you are finished making adjustments, button twice. press the R-15 (EXIT) button twice. • This will return to the screen that was displayed before • This will return to the screen that was displayed before you displayed the scale screen.

  • Page 25: Playing Arpeggio Phrases Automatically (Arpeggiator

    Selecting and Playing a Tone Press the R-18 (AUTO HARMONIZE/ Playing Arpeggio Phrases ARPEGGIATOR) button. Automatically (Arpeggiator) • This causes a pointer indicator to appear on the display next to ARPEG. With the arpeggiator, you can play various arpeggios and other phrases automatically by simply pressing keys on the keyboard.

  • Page 26: Using Auto Accompaniment

    Using Auto Accompaniment R-15 R-15 L-3 - L-8 L-3 - L-8 R-16 R-16 R-17 R-17 L-10 L-10 R-14 R-14 L-11 L-11 R-13 R-13 L-12 L-12 L-13 L-13 L-15 L-15 L-17 L-17 L-14 L-14 L-16 L-16 C-13 C-13 R-18 R-18 With Auto Accompaniment, simply select the accompaniment Use the dial to scroll through the rhythm rhythm you want and the matching accompaniment (drums, numbers until the one you want is displayed.
  • Page 27 Play other chords with your left hand as you play the melody with your right hand. • You can use “CASIO Chord” or other simplified chord fingering modes to play chords. For details, see “Selecting a Chord Fingering Mode” in the following section.

  • Page 28: Selecting A Chord Fingering Mode

    You can select from among the following five chord fingering ■ CASIO Chord modes. With “CASIO Chord”, you can use simplified fingerings to play the four types of chords described below. 1: Fingered 1 2: Fingered 2...

  • Page 29: Modifying Auto Accompaniment Patterns

    Using Auto Accompaniment Modifying Auto Accompaniment Using One-Touch Presets Patterns One-Touch Preset gives you one-touch access to tone and tempo settings that go well with the currently selected Auto There are six different Auto Accompaniment patterns, shown Accompaniment rhythm pattern. below.

  • Page 30: Using Auto Harmonize

    Using Auto Accompaniment Use the dial or R-14 (–, +) buttons to select the Using Auto Harmonize auto harmonize type you want to use. Auto harmonize lets you add harmony to melody notes you • You can select one of the type numbers (001 through play with your right hand.

  • Page 31: Using The Rhythm Editor

    Using Auto Accompaniment To turn off auto harmonize, press the R-18 Use buttons L-12 (INTRO) through L-15 (AUTO HARMONIZE/ARPEGGIATOR) button (SYNCHRO/ENDING) to select the again. accompaniment pattern you want to edit. If you • This causes the pointer indicator next to A.HAR. to want to edit the intro accompaniment pattern, disappear.
  • Page 32 Using Auto Accompaniment Edit the selected accompaniment pattern *1 Only drum set sounds (tone numbers K:129 through instrument part as desired. K:145) can be selected for drum parts and percussion parts. Drum set sounds cannot be selected for the bass •...
  • Page 33 Using Auto Accompaniment After everything is the way you want, press the R-16 (ENTER) button. • Pressing the R-15 (EXIT) button in place of step 8 displays • This displays a screen for specifying the destination the confirmation screen shown below. Pressing the R-14 user rhythm number and rhythm name.

  • Page 34: Applying Effects To A Sound

    Applying Effects to a Sound You can apply a variety of different acoustic effects to the sounds produced by the Digital Keyboard. The built-in effects include a wide variety of variations that give you access to a selection of general digital effects. •...
  • Page 35 Applying Effects to a Sound ■ DSP Effect Mode Configuration The DSP effect mode is enabled while “DSP” is selected for the “Chorus/DSP” effect parameter. DSP and reverb can be used in the DSP effect mode. Part A01-A16, B01-B16 Output Part Volume/Pan Master Tone...

  • Page 36: Selecting An Effect

    Applying Effects to a Sound R-15 R-15 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 Selecting an Effect • A pointer indicator is displayed next to REVERB when Effects are divided among different types (reverb, chorus, anything other than “oFF” is selected for the reverb type. DSP), so first you need to use the procedure below to select The pointer indicator is not displayed next to REVERB an effect type.
  • Page 37 Applying Effects to a Sound Use the R-17 (t, y) buttons to move the thick brackets (%) to the “Chorus/DSP” setting. • Selecting a tone with DSP causes the “Chorus/DSP” setting to change automatically to the “DSP” (DSP Use the R-14 (–, +) buttons to select “Chorus”. effect mode), so the chorus effect will not be available.

  • Page 38: Creating A User Dsp

    Applying Effects to a Sound Use the dial or R-14 (–, +) buttons to select the Creating a User DSP preset DSP you want to use. • DSPs with the leading numbers 001 through 100 (and You can create a user DSP by editing one of the built-in “ton”) are preset DSPs.
  • Page 39 Applying Effects to a Sound Use the R-17 (t, y) buttons to move the thick Press the R-14 (YES) button. brackets (%) to the parameter you want to • This displays a screen for specifying the destination user DSP number and DSP name. change.

  • Page 40: Using The Mixer

    Using the Mixer R-15 R-15 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 C-13 C-13 This Go here for more Mixer Overview Is used for this: part: information: The sound source of this Digital Keyboard is capable of Auto Accompaniment “Using Auto sounding up to 32 individual parts simultaneously.

  • Page 41: Mixer Operation

    Using the Mixer Use the R-17 (t, y) buttons to move the thick Mixer Operation brackets (%) to the parameter you want to change. To change mixer parameters • The parameters that can be configured depend on the currently selected setting. For details, refer to the Press the C-5 (MIXER) button.
  • Page 42 Using the Mixer To initialize all mixer parameters To change the information displayed by the level meter while configuring part parameter settings • For details about how initial default settings are configured While the mixer screen is displayed, hold down when you perform the following procedure, see “Parameter List”...

  • Page 43: Mixer Parameter Settings

    Using the Mixer Mixer Parameter Settings The tables below show the parameters that can be configured on the mixer screen. The settings marked with an asterisk (*) in the “Setting Range” column are initial defaults. MASTER Parameters MASTER parameters include items for adjusting the volume level, pan position, and other settings that are applied globally to all parts.
  • Page 44 Using the Mixer MIC Parameters (WK-6600 Only) The MIC parameters include microphone input (input via T-5 (MIC IN) jack) related settings. Parameter Name Description Setting Range Part Specifies if sound input via a microphone should be output (on) or not output oFF, on (Mic Enable) (oFF).

  • Page 45: Part Parameters

    Using the Mixer Part Parameters Part parameters include setting items that can be adjusted for parts A01 through A16 and B01 through B16. Parameter Name Description Setting Range TONE Specifies a tone for each part. When configuring this parameter, you can use the A:001 to L:010 (Part Tone) buttons from R-1 ([A] PIANO) through R-12 ([L] USER TONES) to select a tone...

  • Page 46: Using The Tone Editor

    Using the Tone Editor R-15 R-15 R-12 R-12 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 C-13 C-13 You can create a user tone by editing one of the built-in preset (1) Tone Characteristic Waveform tones. • Tone Setting Specifies which of the preset tones should be used as the Tone Creation Overview original tone.

  • Page 47: Creating A User Tone

    Using the Tone Editor • Cutoff Frequency Creating a User Tone The cutoff frequency is a parameter for adjusting timbre by cutting any frequency that is higher than a specific frequency. A larger cutoff frequency produces a brighter (harder) timbre, User Tone Numbers while a smaller frequency produces a darker (softer) timbre.
  • Page 48 Using the Tone Editor To save a rhythm after you edit it, hold down the R-13 (FUNCTION) button as you press the • Pressing the R-15 (EXIT) button in place of step 6 displays C-13 (MENU) button. the confirmation screen shown below. Pressing the R-14 •...

  • Page 49: Tone Parameter Settings

    Using the Tone Editor Tone Parameter Settings The table below shows the parameters that can be configured on the tone editor screen. For information about each parameter, also refer to “Tone Creation Overview” (page E-44). The settings marked with an asterisk (*) in the “Setting Range” column are initial defaults. Parameter Name Description Setting Range...
  • Page 50 Using the Tone Editor Parameter Name Description Setting Range DSP On Off Specifies whether DSP should be applied (on) or not applied (oFF) to notes. , on (DSP On/Off) The following four settings become enabled when “on” is selected for this setting.

  • Page 51: Music Presets

    Music Presets R-15 R-15 L-3 - L-8 L-3 - L-8 R-1 - R-12 R-1 - R-12 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 L-13 L-13 L-15 L-15 L-17 L-17 C-12 C-12 L-14 L-14 L-16 L-16 C-13 C-13 While holding down the L-6 ([D] WORLD/ Using Music Presets VARIOUS) button, press the L-7 ([E] PIANO Music presets provide one-touch access to Auto...
  • Page 52 Music Presets Use the buttons from L-3 ([A] POPS/ROCK/ To stop playing, press the L-15 (SYNCHRO/ DANCE) to L-8 ([F] USER RHYTHMS) to select a ENDING) button or the L-16 (START/STOP) music preset group. button. • The D indicator continues to flash on the display even after you stop playing.
  • Page 53 Music Presets Music Preset Settings The settings listed in the table below are recalled when a music preset is selected. • Except for the chord progression, all of the settings can be modified after a music preset is selected. Refer to the information noted in the “Go here for more information”...
  • Page 54 Music Presets To change music preset Auto To change the rhythm while using a music Accompaniment settings preset While the music preset screen is displayed, you can use the While the music preset screen is displayed, buttons L-3 ([A] L-17 (ACCOMP ON/OFF) button to change Auto POPS/ROCK/DANCE) to L-8 ([F] USER RHYTHMS) function Accompaniment settings.

  • Page 55: Creating A User Preset

    Music Presets You can change each of the parameters on the Creating a User Preset parameter menu as required. (1) Use the R-17 (t, y, u, i) buttons to move 0 to the parameter you want to change. User Preset Numbers (2) Use the dial or the R-14 (–, +) buttons to change the Preset areas numbered F:001 through F:050 are for storage setting value.
  • Page 56 Music Presets Use the R-17 (y) button to move the 0 to “Store” and then press the R-16 (ENTER) • Pressing the R-15 (EXIT) button in place of step 6 displays button. the confirmation screen shown below. Pressing the R-14 •...
  • Page 57 Music Presets Timing Setting and Chord Progression Playback This section explains how chord progressions are played in accordance with the “Timing” (Timing set) settings in step 5 under “To create and save a user preset” (page E-53). Note that this setting affects playback only. It does not change the chord progression data.
  • Page 58 Music Presets • 3/4 Plays chords measure-by-measure at a timing that is 3/4 times that of the recording. This setting is best for use with a 6/8 time rhythm. Playing back a chord progression like that shown for “Half” above while “3/4” is specified results in the progression shown below. 3/4 Playback when a 4/4 time rhythm is assigned to the user preset Measure Beat...

  • Page 59: Editing A Chord Progression

    Music Presets Perform the following chord progression Editing a Chord Progression editing operations. You can modify the preset chord progression and save it as a • Change an existing chord (“To modify recorded chord user preset, or you can create a new chord progression from data”, page E-58) scratch and save it.
  • Page 60 Music Presets To modify recorded chord data To delete recorded chord data Perform steps 1 through 4 of the procedure Perform steps 1 through 4 of the procedure under “Chord Progression Editing Flow” on under “Chord Progression Editing Flow” on page E-57.
  • Page 61 Music Presets Specify the location of the new chord insert as a To perform step input of chords number of beats after the current cursor Perform steps 1 through 4 of the procedure position. under “Chord Progression Editing Flow” on To specify this number of beats Press this button: page E-57.
  • Page 62 Music Presets To perform menu operations *1 Deletes all existing chords, and replaces it with four measures of data with a C-chord at the first beat of the first Perform steps 1 through 4 of the procedure measure (user preset initial data). *2 You will not be able to execute this operation if the number under “Chord Progression Editing Flow”...

  • Page 63: Saving Keyboard Setups To Registration Memory

    Saving Keyboard Setups to Registration Memory R-14 R-14 C-12 C-12 C-10 C-10 C-11 C-11 C-13 C-13 Registration memory lets you store Digital Keyboard setups (tone, rhythm, etc.) for instant recall whenever you need them. • For information about items that can be part of a registration setup, see “Parameter List”...

  • Page 64: To Save A Setup To Registration Memory

    Saving Keyboard Setups to Registration Memory To save a setup to registration To recall a setup from registration memory memory Configure the tone, rhythm, and other settings Press the C-8 (BANK) button to select the bank you want to include in the setup. that contains the setup you want to recall.

  • Page 65: Using The Song Sequencer

    Using the Song Sequencer R-15 R-15 R-1 - R-12 R-1 - R-12 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 L-12 L-12 L-13 L-13 L-15 L-15 C-12 C-12 L-14 L-14 L-16 L-16 C-10 C-10 C-11 C-11 C-13 C-13 You can use the song sequencer to record keyboard play Starting One-touch Recording (including Auto Accompaniment), or to record individual parts (EASY REC)
  • Page 66 Using the Song Sequencer Press the C-2 (RECORD) button. (4) Use the R-17 (y) button to move the 0 to “Precount” and then use the R-14 (–, +) buttons to turn the precount on or off. Turing on the precount inserts a one-measure count before the start of recording when you press the L-16 (START/STOP) button in step 4.

  • Page 67: What You Can Do With The Song Sequencer

    Using the Song Sequencer To use EASY REC to record a performance What you can do with the song using a music preset sequencer Perform steps 1 through 4 under “To perform The simplest use of the song sequencer is to record a using a music preset”...
  • Page 68 Using the Song Sequencer System Track and Track 01 through 16 Common Recording Content • Due to the way song parts are configured, settings configured by a recalled registration are applied to different ■ Recording Start numbered parts than they were assigned to when the setup •...

  • Page 69: Recording Individual Tracks

    Using the Song Sequencer Use the R-17 (u, i) buttons to select the Recording Individual Tracks system track. This section explains how to record to the system track and • If the system track already contains recorded data, how to record to Tracks 01 through 16. For details about track starting recording in step 7 below will cause the current configuration and what is recorded to each track, see “What system track data to be deleted.
  • Page 70 Using the Song Sequencer Start playing something on the keyboard. To record to Tracks 01 through 16 • Recording starts automatically when you perform any one of the following operations. Press the C-3 (SONG SEQUENCER) button to – Playing on the keyboard enter the song sequencer mode.
  • Page 71 Using the Song Sequencer Use the R-17 (u, i) buttons to select a track (5) Use the R-17 (y) button to move the 0 to “RecType”, (Track 01 through Track 16). and then use the R-14 (–, +) buttons to select “REPL” or “OVDB”.
  • Page 72 Using the Song Sequencer To clear the content of a single track To clear a single song immediately after immediately after recording it recording it While the song sequencer mode initial screen is While the song sequencer mode initial screen is on the display after track recording is complete, on the display after track recording is complete, hold down the R-13 (FUNCTION) button as you...

  • Page 73: Using Panel Record To Rewrite Song Header Settings

    Using the Song Sequencer Mixer Settings in the Song Sequencer Mode Using Panel Record to Rewrite You can access the mixer during playback, playback standby, Song Header Settings or record standby (C-2 (RECORD) button flashing), or while recording is in progress (C-2 (RECORD) button lit). Press the The header of each song contains “header settings”, which C-5 (MIXER) button to display the mixer screen.

  • Page 74: Playing A Recorded Song

    Using the Song Sequencer Use the R-17 (y) button to move the 0 to Press the L-16 (START/STOP) button. “PanelRecord”. • This starts playback. The following operations are supported during playback. To do this: Do this: Skip Forward Hold down the L-14 (dFF) button. Skip Back Hold down the L-13 (sREW) button.
  • Page 75 Using the Song Sequencer To play back a particular part alone To repeat play a specific phrase Press the C-3 (SONG SEQUENCER) button to Hold down the R-13 (REPEAT) button until the enter the song sequencer mode. locator screen shown below appears on the display.

  • Page 76: Editing A Song

    Using the Song Sequencer To stop playback, press the L-16 (START/STOP) Editing a Song button. The following operations are supported during song editing. • Deleting a specific song or all songs • Copying a song from one area to another •...
  • Page 77 Using the Song Sequencer Press the R-17 (y) button to move the thick To clear a song brackets (%) to “To”. Perform the procedure under “To start a song editor operation” on page E-74 to display the song editor menu, with the 0 located at “Clear”.
  • Page 78 Using the Song Sequencer To delete a specific measure from a song To insert blank measures into a song Perform the procedure under “To start a song Perform the procedure under “To start a song editor operation” on page E-74 to display the editor operation”...
  • Page 79 Using the Song Sequencer In response to the “Sure?” message that To extract system track recorded content to appears, press the R-14 (YES) button to start track 04 through 07 or 09 through 16 extraction or the R-14 (NO) button to cancel. As explained in detail under “Songs, tracks, and parts”...

  • Page 80: Editing A Track

    Using the Song Sequencer To clear a single track Editing a Track Perform the procedure under “To start a track The following operations are supported during track (system track, Tracks 01 through 16) editing. editor operation” on page E-78 to display the •...
  • Page 81 Using the Song Sequencer To copy one track to another track (Tracks 01 To combine two tracks into a single track through 16 only) (Tracks 01 through 16 only) Perform the procedure under “To start a track In the song sequencer mode, use the R-17 (u, i) buttons to select the lower numbered track editor operation”...

  • Page 82: Editing Events

    Using the Song Sequencer After everything is the way you want, press the To start an event editor operation R-16 (ENTER) button. Press the C-3 (SONG SEQUENCER) button to • If the destination track does not contain recorded data, combination of the tracks starts immediately. enter the song sequencer mode.
  • Page 83 Using the Song Sequencer The following explains the meaning of each screen position. Event Types and Screen Content Number Description The event editor screen displays the individual events that make up a song as values and characters as shown in the For all event types, indicates the even location sample screen below.
  • Page 84 Using the Song Sequencer ■ Event Data List The following table shows the event types that correspond to the abbreviations that appear on the display, as well as the parameters of each event type and setting ranges. • “ display” and “ display”...
  • Page 85 Using the Song Sequencer ■ System Track Events Event Type display during display Parameter Name Setting Range insert display Event Name [Tone_U1] TnU1 UPPER 1 Tone VALU Tone Number A:001 - L:010 [Tone_U2] TnU2 UPPER 2 Tone VALU Tone Number A:001 - L:010 [Tone_Lo] TnLo...
  • Page 86 Using the Song Sequencer Event Type display during display Parameter Name Setting Range insert display Event Name HARM, UPP1, UPP2, PART Part LOWR [CrsTune] CTun Part Coarse Tune VALU Part Coarse Tune –24 - 00 - +24 HARM, UPP1, UPP2, PART Part LOWR...
  • Page 87 Using the Song Sequencer To select the types of events that appear on To edit an existing event the Event Editor screen (View Select) Display the event editor screen of the track that Perform the procedure under “To start an event includes the event you want to edit.
  • Page 88 Using the Song Sequencer While holding down the R-13 (FUNCTION) To delete all events in a track button, press the C-13 (MENU) button to display Display the event editor screen of the track that the event editor menu. includes the events you want to delete. Use the R-17 (t, y) button to move the 0 to •...
  • Page 89 Using the Song Sequencer After everything is the way you want, press the To insert an event R-16 (ENTER) button. Display the event editor screen of the track • This inserts the specified event. where you want to insert the event. •...
  • Page 90 Using the Song Sequencer Press the C-10 (COPY) button. To quantize an individual note event • This displays the “Copy” screen. • If you have already specified a range using the locator Display the event editor screen of the track that screen (page E-73), that range will be displayed on the includes the event you want to quantize.
  • Page 91 Using the Song Sequencer Use the dial or R-14 (–, +) buttons to change the To quantize all note events in a track setting in the thick brackets (%) to “Locator”. Display the event editor screen of the track you •...
  • Page 92 Using the Song Sequencer ■ To delete all pitch bender events within a specific Deleting Pitch Bender Events range of a track You can use the procedures in this section to delete all pitch bender events from a track or from a specific range in a track. Display the event editor screen of the track whose pitch bender events you want to delete.
  • Page 93 Using the Song Sequencer Press the R-16 (ENTER) button. To adjust the velocity value of a note event • This will display the setting screen like the one shown Display the event editor screen of the track you below. want to edit. •...
  • Page 94 Using the Song Sequencer To adjust the gate time value of a note event To delete a beat event Perform steps 1 through 5 under “To adjust the Perform the procedure under “To start an event velocity value of a note event” on page E-91. In editor operation”...

  • Page 95: Directly Inputting Note Events (Step Input

    Using the Song Sequencer To insert a beat event To perform step input Perform steps 1 and 2 under “To delete a beat Display the event editor screen of the track event” (page E-92). where you want to perform step input. •...
  • Page 96 Using the Song Sequencer Use buttons R-1 (5) to R-4 ( • ) and buttons R-7 (6) to R-10 (,) to specify the length of the note you want to input. • For information about how to specify note lengths, see step 4 under “To insert an event” (page E-87). •...

  • Page 97: Using The Function Menu

    Using the Function Menu R-15 R-15 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 C-13 C-13 R-18 R-18 The function menu includes settings that normally need to be To adjust the “Tune” (Tuning) and “EQ” accessed relatively infrequently, such as overall tuning, (Equalizer) settings, use the R-17 (t, y) equalizer, touch response, local control on/off, etc.

  • Page 98: Function Menu Settings

    Using the Function Menu To exit the function menu, press the R-13 Performance (Performance/Accompaniment) (FUNCTION) button or R-15 (EXIT) button. Group • Note that all function menu settings you configure are • You can directly display this group screen without going returned to their initial defaults whenever you turn off through the function menu.
  • Page 99 Using the Function Menu Play/CardUtl (Playback, Card Utility) Group ArpegHold (Arpeggiator Hold) Specifies the how arpeggio is played in accordance with pressed keyboard keys when the arpeggiator (page E-23) is being used. • You can directly display this group screen without going : Arpeggio played while the keys of a chord are through the function menu.

  • Page 100: Midi Group

    Using the Function Menu Volume (Volume) Group MIDI Group KeyboardCh (Keyboard Channel) • For details about “parts” mentioned here, see “How Parts Selects the channel for sending keyboard play MIDI data to an are Organized” (page E-38). external device (keyboard channel). - 16 AccompVol.
  • Page 101 Using the Function Menu Use the R-17 (t, y) buttons to select the AutoResume (Auto Resume) operation you want. Specifies whether the Digital Keyboard should remember its setup when turned off and restore it the next time it is turned Move the 0 here: To do this: Return the power on default settings...
  • Page 102 Using the Function Menu ■ To initialize all data and settings (or parameter settings only) Press the R-13 (FUNCTION) button to display the function menu. Use the R-17 (i, y) buttons to move the 0 to “General” and then press the R-16 (ENTER) button.

  • Page 103: Using A Memory Card

    Using a Memory Card R-12 R-12 R-16 R-16 R-17 R-17 R-14 R-14 R-13 R-13 C-13 C-13 You can save Digital Keyboard user area data to a memory • For details about saving and loading all data, see “To batch card and load data from a memory card to Digital Keyboard save all Digital Keyboard data to a memory card”...

  • Page 104: Loading And Removing A Memory Card

    Using a Memory Card • A memory card can become quite warm after very long use Entering the Card Mode in the card slot. This is normal and does not indicate malfunction. Enter the card mode when you want to perform memory card operations.

  • Page 105: Saving Digital Keyboard Data To A Memory Card

    Using a Memory Card Use the R-17 (t, y) buttons to move the 0 to Depending on the type of data you want to save “CardFormat”. to the memory card, perform one of the steps shown below. • All setup registration banks are saved as a batch. Other data is saved in area (data item) units.
  • Page 106 Using a Memory Card Press the R-17 (y) button to change to the To batch save all Digital Keyboard data to a “Xxxx Save” screen. memory card Press the C-7 (CARD) button to enter the card mode. While holding down the R-13 (FUNCTION) button, press the C-13 (MENU) button.

  • Page 107: Loading Data From A Memory Card

    Using a Memory Card To batch load all Digital Keyboard memory Loading Data from a Memory data from a memory card Card Press the C-7 (CARD) button to enter the card mode. • Make sure that all of the data you want to load is in the While holding down the R-13 (FUNCTION) MUSICDAT folder on the memory card.

  • Page 108: To Delete A File From A Memory Card

    Using a Memory Card To delete a file from a memory To rename a file on a memory card card Insert the memory card into the card slot. Insert the memory card into the card slot. Press the C-7 (CARD) button to enter the card Press the C-7 (CARD) button to enter the card mode.

  • Page 109: Playing A Music File From A Memory Card

    Using a Memory Card R-16 R-16 R-17 R-17 R-14 R-14 L-12 L-12 L-13 L-13 L-15 L-15 L-17 L-17 L-14 L-14 L-16 L-16 Use the dial or R-14 (–, +) buttons to select the Playing a Music File from a music file you want to play. Memory Card You can use the Digital Keyboard to play music files you saved to a memory card with your computer.
  • Page 110 Using a Memory Card To start playback, press the L-16 (PLAY/STOP) Turning Off One Hand Part and Playing the button. Other Hand Part on the Keyboard (Part Off) • This starts playback of the part you turned on in step 3. When playing a music file of a piano piece that has the left hand and the right hand parts recorded in separate MIDI To stop playback, press the L-16 (PLAY/STOP)
  • Page 111 Using a Memory Card Playing on the Keyboard Along with To repeat play a specific section of a song Playback of a Music File on a memory card Enter the card mode and select the MIDI file you You can perform the following operations and play on the want to play.

  • Page 112: Connecting To A Computer

    Configure the music software settings to select one of the following as the MIDI device. • USB jack CASIO USB-MIDI : (For Windows 7, Windows Vista, Mac OS X) USB Audio Device : (For Windows XP) • Never connect to a computer that does not conform to •...

  • Page 113: Storing And Loading Digital Keyboard Memory Data

    You can use the procedures in this section to import and use storage. You also can load Auto Accompaniment data you rhythm data from another model. download from the CASIO website to the Digital Keyboard, which greatly expands the Auto Accompaniment patterns Rhythm Data Compatibility available to you.

  • Page 114: Importing Data From Various Storage Media

    Connecting to a Computer Importing and Transferring Rhythm Data To load rhythm data into Digital Keyboard from Other Models memory You can transfer rhythm data from other models by loading it Perform one of the procedures below, depending on the type from a memory card, or by using Data Manager to transfer the of data you want to load.

  • Page 115: Reference

    Reference Error Messages Display Message Cause Required Action Format 1. The current memory card format is not compatible with this 1. Format the memory card on the Digital Keyboard (page Digital Keyboard. E-102). 2. The memory card capacity is greater than 32GB. 2.

  • Page 116: Troubleshooting

    Reference Troubleshooting Symptom Action Included Accessories I can’t find something that should be Carefully check inside all of the packing materials. included with the product. Power Requirements Power will not turn on. • Check the AC adaptor or make sure that the batteries are facing correctly (page E-9).
  • Page 117 Reference Symptom Action Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard settings (page E-13). • Replace the batteries with new ones or switch over to AC adaptor power (page E-9). Some notes are cut off while they are Notes are cut off whenever the number of notes being sounded exceeds the playing.

  • Page 118: Specifications

    Keyboard Play 5 songs, 17 tracks Memory Capacity Approximately 12,000 notes (total for 5 songs) Mixer 32 parts (A01-A16/B01-B16) Master parameters, DSP parameters, Part parameters (CTK-6200/WK-6600), MIC parameters (WK-6600 only) Other Functions Transpose ±1 octaves (–12 to +12 semitones) Octave Shift UPPER 1/UPPER 2/LOWER, ±2 octaves...
  • Page 119 Speakers 12cm × 2 + 3cm × 2 (Output: 6.0W + 6.0W) 12V = 18W Power Consumption Dimensions CTK-6200: 94.8 × 38.4 × 12.2 cm (37 × 15 × 4 inch) WK-6600: 116.1 × 38.5 × 14.7 cm (45 × 15 ×...

  • Page 120: Operating Precautions

    Reference Operating Precautions Be sure to read and observe the following operating precautions. ■ Location Avoid the following locations for this product. • Areas exposed to direct sunlight and high humidity • Areas subjected to temperature extremes • Near a radio, TV, video deck, or tuner The above devices will not cause malfunction of the product, but the product can cause interference in the audio or video of a nearby device.

  • Page 121: Dsp Effect List

    Reference DSP Effect List Preset DSP List The table below shows the preset DSPs that can be selected by the procedure under “To use a DSP” (page E-35). • The “Number” column shows DSP numbers, while the “Screen Name” shows the DSP name that appears on the display. •...
  • Page 122 Reference DSP Type List All of the Digital Keyboard’s preset DSPs belong to one of the DSP types shown in the table below. When creating a user DSP (page E-36) or when using the tone editor (page E-44) to edit the DSP applied to a tone, you need to select one of the DSP types in the table.
  • Page 123 Reference 04: Enhancer DSP Parameter List Phase shifts low-range sounds and high-range sounds of the ■ Single Type DSP Parameters input signal to enhance their profiles. Parameters and Value Ranges: 01: Wah 1 :Low Frequency (0 to 127) Adjusts the low range enhancer frequency. This is a “wah”...
  • Page 124 Reference 08: Flanger 11: Reflection Applies wildly pulsating and metallic reverberation to sounds. An effector that extracts early reflections from reverb. Applies LFO waveform is selectable. acoustic presence to sounds. Parameters and Value Ranges: Parameters and Value Ranges: 1 :LFO Rate (0 to 127) 1 :Type (1, 2, 3, 4, 5, 6, 7, 8) Adjusts the LFO rate.
  • Page 125 Reference ■ Dual Type DSP Parameters 14: Lo-Fi Dual type DSPs are configured by combining two different Applies various types of noise to the input signal to reproduce single type DSPs. Use the procedure below to determine what a retro Lo-Fi sound. parameters that can be configured for each dual type DSP, Includes wow and flutter for rotational fluctuation like that in and the operation, and setting ranges of dual type DSPs.

  • Page 126: Fingering Guide

    Reference Fingered 3, Full Range Chords Fingering Guide In addition to the chords that can be fingered with Fingered 1 and Fingered 2, the following chords also are recognized. Fingered 1, Fingered 2 Chords Ddim add9 Cdim • With Fingered 3, the lowest note fingered is interpreted as Caug the base note.

  • Page 127: Assigning A Midi Channel To Each Part

    Reference Assigning a MIDI Channel to Each Part The following shows the relationship between MIDI IN and MIDI OUT channels and each part. MIDI Channel MIDI Channel This part: Part name This part: Part name Upper1 Track /MIDI 01 Upper2 Track /MIDI 02 Lower...

  • Page 128: Parameter List

    Reference Parameter List Refer to this column in To check this setting item: the table below: Setting items that are always saved when power is turned off Setting items stored in registration memory (page E-61) When “on” is selected for the “AutoResume (Auto Resume)” setting (page E-99), setting items that are restored to those in effect the last time power was turned off Items that are stored as “Default (Default Settings)”...
  • Page 129 Reference E-127...
  • Page 132 This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. MA1201-A Printed in China CTK6200/WK6600E1A...

This manual is also suitable for:

Wk-6600

Table of Contents