Selecting Chorus - Casio WK-3000 User Manual

Applying Effects to Tones

Selecting CHORUS

Perform the following steps to select CHORUS.
1
Press the EFFECT button, so the pointer appears
next to EFFECT on the display screen.
2
Press the [ ] CURSOR button twice.
• This displays the chorus editing screen.
3
Press the [ ] CURSOR button.
• The chorus type setting screen will appear
automatically about fives seconds after you press the
button.
4
Use the [+] and [–] buttons or the number buttons
to scroll through the chorus types until the one you
want is displayed, or use the number buttons to
input the chorus number you want to select.
• See the list on page A-17 for information about the
types of CHORUS effects that are available.
• Here you could also change the parameters of the
effect you selected, if you want. See "Changing the
Settings of CHORUS Parameters" for more
information.
E-36
WK3000_e_26-37.p65
EFFECT
36
CURSOR
EXIT
Changing the Settings of CHORUS
Parameters
You can control the relative strength of an effect and how it is
applied. The parameters you can control depend on the effect.
See the following section titled "CHORUS Parameters" for
more information.
1
After selecting the chorus type you want, use the
[ ] and [ ] CURSOR buttons to display the
parameter whose setting you want to change.
• This displays the parameter setting screen.
2
Use the [+] and [–] buttons or the number buttons
to input the parameter setting you want.
3
Press the EFFECT or EXIT button.
• This returns to the tone or rhythm selection screen.
CHORUS Parameters
I Chorus Level (Range: 000 to 127)
Specifies the size of the chorus sound.
I Chorus Rate (Range: 000 to 127)
Specifies the undulation speed of the chorus sound. A
higher value produces faster undulation.
I Chorus Depth (Range: 000 to 127)
Specifies the undulation depth of the chorus sound. A
higher value produces deeper undulation.
NOTE
• Whether or not an effect is applied to the parts that are
sounding also depends on Mixer Mode Reverb Send,
Chorus Send, and DSP on/off settings. See "Mixer
Function" on page E-47 for more information.
04.3.26, 0:10 PM
Number buttons
[+] / [–]
735A-E-038A