Connections - Casio WK-3000 User Manual

Connections

• WK-3500
Phones and Line Out Terminals
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Front]
PHONES Terminal
Stereo standard plug
Connecting Phones 1
Connecting phones cuts off output from the keyboard's built-
in speakers, so you can play even late at night without
disturbing anyone.
[Rear Panel]
Audio amplifier AUX IN, etc.
LEFT
(White)
RIGHT
(Red)
OUT
Guitar amplifier,
keyboard amplifier, etc.
INPUT 1
INPUT 2
Connecting to Audio Equipment 2
Use commercially available cords to connect to the two jacks
as shown in Figure 2 . It is up to you to purchase connecting
cables like the ones shown in the illustration for connection.
Normally in this configuration, you must set the audio
equipment's input selector to the setting that specifies the
terminal (such as AUX IN) that the keyboard is connected to.
Use the keyboard's VOLUME knob to adjust the volume level.
735A-E-021A
WK3100_e_10-25.p65
1
PIN plug
MIDI
SUSTAIN/ R L/MONO
ASSIGNABLE JACK LINE OUT DC 12V
IN
Standard jacks
Standard plugs
19
Connecting to a Musical Instrument Amplifier 3
Use commercially available cords to connect to the two jacks
as shown in Figure 3 . It is up to you to purchase connecting
cables like the ones shown in the illustration for connection.
Use the keyboard's VOLUME knob to adjust the volume level.
• If your amplifier has only one input jack, connect a cord to
the L/MONO jack only.
NOTE
• You can also connect the keyboard's MIDI terminal to a
computer or sequencer. See "MIDI" on page E-89 for
details.
04.3.26, 0:10 PM
E-19