Saxby Lighting Louvre Photocell Installation Manual

Download this manual

Technical data

Supply

220-240V~, 50Hz

Voltage:

Bulb

1 x Max. 60W E27 GLS (required)

Type:

Conformity with all relevant UKCA Directive requirements.

Conformity with all relevant EC Directive requirements.

This is a Class 1 product and must be earthed.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or local store for recycling advice.

This product is rated at IP44

Care and Safety

Allow 10 minutes to cool before replacing, adjusting or cleaning.

We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the ﬁnish.

For your safety, always switch off the power supply before changing lightbulbs, or cleaning.

The bulb source is protected by the shade. The shade must be replaced immediately

should it become cracked or damaged. This fitting must not be used without the shade

Replace Cracked Shade

in place.

V1 09/07/2021

UK Manufacturer: BH17 7BY

EU Manufacturer: 1 Gnarrenburg, 27442

Instruction manual

Louvre Photocell

97853

www.saxbylighting.com

Need help?

Do you have a question about the Louvre Photocell and is the answer not in the manual?

Page 1 Instruction manual Technical data Supply 220-240V~, 50Hz Voltage: Louvre Photocell Bulb 1 x Max. 60W E27 GLS (required) Type: 97853 Conformity with all relevant UKCA Directive requirements. Conformity with all relevant EC Directive requirements. This is a Class 1 product and must be earthed.
Page 2 Thank you for purchasing this light ﬁtting. Please read the instructions carefully before use to ensure safe and satisfactory Installation operation of this product. Please retain these instructions for future reference. Existing ﬁttings must be completely removed before installation of a new product. Before removing the existing ﬁtting, carefully note the position of each set of wires.

97853