Connecting The Battery To The Charger - FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual

Risk of electric shock!
Improper handling of the CHARGER or incorrect mains connection may
expose you and others to the risk of electric shock.
►Observe the instructions in in section "CHARGER".
You can either leave the BATTERY in the DRIVEPACK during charging or remove it
from the DRIVEPACK and charge it separately. The charging process can also be
interrupted at any time.
You cannot charge the BATTERY if the temperature is outside the permissible charging
temperature (14 °F to 140 °F (-10 °C to +60 °C)).. This is not possible even if the
BATTERY is connected to the CHARGER.
Charging is only possible again when the permissible charging temperature has
been reached.
Fully charge the BATTERY prior to initial operation so that you can use the full
→
capacity of the BATTERY.

27.7.1 Connecting the BATTERY to the CHARGER

1. Open the cover flap to access the charging socket [D.3].
2. Insert the charging plug [E.3] into the charging socket on the BATTERY. Since
the charging plug is magnetically coded, it can only be plugged in in the
intended position.
62
US-English | Original instructions
DANGER
D.3