Removing The Battery From The Drivepack; Switching Off The Battery; Checking The Charge Level And Soh Of The Battery - FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual

27.3 Removing the BATTERY from the DRIVEPACK

Pinch risk!
You may trap your fingers when removing the BATTERY from the
DRIVEPACK.
►When pressing the push button or removing the BATTERY, be careful
not to pinch your fingers.
1. Hold the DRIVEPACK with one hand and secure the BATTERY with the other.
2. Press the push button [D.1] as far as it will go to release the BATTERY from the lock.
3. Press and hold the push button, grasp the BATTERY by the two handles and
gently pull the BATTERY out of the battery holder [A.4].
The two handles are located at the top end of the BATTERY on the sides
(see arrows).

27.4 Switching off the BATTERY

Turn off the BATTERY by pressing and holding the on/off button [D.5].
→

27.5 Checking the charge level and SOH of the BATTERY

You can use the charge level indicator [D.4] on the BATTERY to check
the current charge level before or while using the BATTERY (e.g. for
trip planning).
The charge level indicator is not designed to be used during the
charging process to ascertain whether the BATTERY has already
reached maximum charge or whether it can still be charged. You can
use the LED indicator [E.8] on the CHARGER for this.
→
You can find detailed information here
CHARGER to the BATTERY".
60
US-English | Original instructions
CAUTION
in Chapter 30.2 "Connecting the
D.1