Removing The Drivepack From The E-Bike - FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual

Hide thumbs Also See for RIDE 50 TRAIL/STREET:
Table of Contents

Advertisement

3. Check that the DRIVEPACK is seated securely.
If the DRIVEPACK does not lock, repeat the procedure. Do not use the drive
system if the DRIVEPACK on the e-bike cannot be locked. If the unlocked DRIVE-
PACK falls out of the e-bike holder while riding, this can lead to an accident/fall
and damage the DRIVEPACK or the BATTERY.
4.1.3

Removing the DRIVEPACK from the e-bike

You can find detailed information here
e-bike".
Risk of burns!
The cooling unit on the DRIVEPACK can become very hot during oper-
ation and you may burn yourself when touching it.
►Allow the DRIVEPACK to cool completely before touching the
DRIVEPACK.
1. Hold the DRIVEPACK with one hand.
2. Move the locking lever upwards as far as possible to release the DRIVEPACK
from the lock.
3. Hold the locking lever in the open position and carefully lower the DRIVEPACK
at the same time.
4. Then move the locking lever back to the closed position and remove the
DRIVEPACK from the interface on the BOTTOM BRACKET.
22
in Chapter 16.2 "Removing the DRIVEPACK from the
WARNING
A
B
US-English | Original instructions
A
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents