Restart Drive System; Rain Mode - FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual

Hide thumbs Also See for RIDE 50 TRAIL/STREET:
Table of Contents

Advertisement

Original instructions | US-English
To activate the Attack function:
Press and hold the upper touch sensor [C.1] on the REMOTE for 2 seconds.
The LEDs on the indicator [C.5] display a special animation sequence to indicate
that the Attack function is active.
The Attack function is deactivated automatically after 4 or 12 seconds or when
you stop pedaling (e.g. to brake).
The Attack function cannot be activated if:
• you are riding at a speed of more than 25 km/h / 20 mph.
• you have not selected a support level (the LEDs on the indicator [C.5]
on the REMOTE light up white).
• you have activated Rain mode on the REMOTE.

24.4 Restart drive system

Press and hold the center button [C.2] on the REMOTE for 8 seconds to shut
down your drive system completely: All LEDs [C.5]/[C.6] go out.
When the drive system is ready to be switched on again, the status indicator [C.6]
flashes green or blue*: Now you can restart your drive system as usual.

24.5 Rain mode

The rain mode prevents rain drops from unintentionally adjusting the support level
of your e-bike. If you have activated the rain mode, use the center button to set
the desired support level:
1. Activate Rain mode by pressing and holding the center button [C.2] on the
REMOTE until the LED indicator [C.5] on the REMOTE displays a brief blue LED
animation instead of the current charge level of the BATTERY (in the color of
the preset support level).
The brief blue LED animation indicates that you have successfully activated
Rain mode.
The LED indicator [C.5] reverts back to showing the current charge level of the
BATTERY in the color of the preset support level.
2. In Rain mode, press the center button once briefly to switch to the next higher
support level.
By briefly pressing the center button again, you can switch to the next higher
support level in the following order:
no support
* The color for the "Ready for operation" status is either green or blue, depending on the model.
"Breeze"
"River"
"Rocket"
no support, and so on.
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents