Usage; Inserting And Removing Components; Inserting The Battery In The Drivepack - FAZUA RIDE 50 TRAIL/STREET Original Instructions Manual

4

USAGE

This chapter describes chronologically how to proceed when using the drive
system.
Incorrect or improper handling may result in explosion, fire or acci-
dents and serious injury.
►You must also read the detailed descriptions in the section for the
relevant component:
• before you use your e-bike equipped with the FAZUA RIDE 50
drive system for the first time,
• if you are unsure how to use it,
• if you have problems carry out the handling steps described
here.

4.1 Inserting and removing components

4.1.1

Inserting the BATTERY in the DRIVEPACK

→
You can find detailed information here
BATTERY" and in Chapter 27.2 "Inserting the BATTERY in the DRIVEPACK".
On delivery, the BATTERY may only be precharged.
Fully charge the BATTERY before inserting it into the DRIVEPACK for
→
the first time.
Risk of explosion and fire!
A damaged or dirty BATTERY may explode and/or cause a fire.
►Never insert a damaged BATTERY into the drivepack.
►Check the BATTERY for visible damage, such as cracks or burn
marks, before each insertion.
►Make sure that the interfaces on the BATTERY are free of dirt
before using it.
1. Check the BATTERY for visible damage.
2. Press the on/off button on the BATTERY once to turn on the BATTERY.
20
US-English | Original instructions
DANGER
in Chapter 27.1 "Checking and switching on the
DANGER