H3C S12500X-AF Series Installation Manual page 83

•
All the network cables, fibers, power cords, and grounding cables have been correctly
connected.
•
The input power voltage meets the requirement of the switch.
•
The console cable is correctly connected, the terminal or PC used for configuration has started,
and the configuration parameters have been set.
To power on the switch, turn on the power source of the switch.
The following is a sample output you can see on the terminal:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing..........Done.
****************************************************************************
*
*
*
****************************************************************************
Compiled Date
CPU Type
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
BASIC CPLD Version
EXTENDED CPLD Version : 4.0
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/S12500X-CMW710-SYSTEM-R1135.bin......................
............................................................................
....................................Done.
Loading file flash:/S12500X-CMW710-DEVKIT-R1135.bin....Done.
Loading file flash:/S12500X-CMW710-MANUFACTURE-R1135.bin...Done.
Loading file flash:/S12500X-CMW710-BOOT-R1135.bin........................
............................................................................
.......................Done.
Image file flash:/S12500X-CMW710-BOOT-R1135.bin is self-decompressing....
............................................................................
.....Done.
System image is starting...
Line aux0 is available.
BootWare, Version 1.32
: Mar 18 2015
: XLP316
: 1200MHz
: DDR3 SDRAM
: 4096MB
: 667MHz
: 1536KB
: 1012MB
: 4.0
: Ver.B
5-3
*
*
*