inward until the spring clips lock the ejector levers in place and the switching fabric module is
completely seated in the slot.
Figure3-11 Removing the switching fabric module from the protection box (S12516X-AF
switching fabric module)
1
2
(1) Five screws to secure the protection box to the switching fabric module
(3) Hold the protection box to disengage it from the connector side of the switching fabric module
Figure3-12 Installing a switching fabric module (S12516X-AF switch)
2
1
2
(1) Push the switching fabric module slowly into the slot
(2) Rotate the ejector levers inward until the spring clips lock the ejector levers in place
1
3
3-16
1
(2) Loosen the captive screws