H3C S12500X-AF Series Installation Manual page 79
Hide thumbs
Also See for S12500X-AF Series:
- Configuration manual (224 pages) ,
- Hardware reference manual (65 pages) ,
- Quick start manual (42 pages)
Table of Contents
Advertisement
2.
Create a Layer 3 interface, assign it an IP address, and make sure the IRF fabric and the
remote network management station can reach each other.
3.
Use Telnet or SNMP to access the IRF fabric from the network management station. (See H3C
S12500-X&S12500X-AF Switch Series Fundamentals Configuration Guide.)
4.
Verify that you can manage all member switches as if they were one node.
5.
Display the running status of the IRF fabric by using the commands in Table4-1.
Table4-1 Displaying and maintaining IRF configuration and running status
Task
Display information about the IRF fabric
Display topology information about the IRF fabric
To avoid IP address collision and network problems, configure a minimum of one MAD mechanism to
detect the presence of multiple identical IRF fabrics and handle collisions. For more information
about MAD, see H3C S12500-X&S12500X-AF Switch Series IRF Configuration Guide.
Command
display irf
display irf topology
4-5
Advertisement
Chapters
Table of Contents
