IMPORTANT:
The bend radius of the cable must be a minimum of eight times the cable diameter.
To replace an SFP+/QSFP+/QSFP28/QSFP-DD/QSFP+ to SFP+ copper cable:
1.
Wear an ESD wrist strap, and make sure it makes good skin contact and is reliably grounded.
For more information, see "Installing FRUs."
2.
Gently press the cable connector in, and then pull the pull latch on the cable outward to pull out
the cable connector.
3.
Install a new SFP+/QSFP+/QSFP28/QSFP-DD/QSFP+ to SFP+ copper cable in the port. For
the installation procedure, see "Installing FRUs."
7-13