Table of Contents
Advertisement
CLOCK
1
3
2
DISPLAY MODE CHANGE
The display on the unit can be changed by pressing DISP button
between the clock and audio display. When a radio, tape and CD function is performed while the time display
is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME
To adjust the time, press the DISP button
To adjust the minute, press the > button
To adjust the hour, press the < button
To advance the time rapidly, hold the > or < button continuously.
Press DISP button
again to start the clock.
......................................................... 1, 4
CLOCK RESET
Press DISP button
for more than 2 seconds and the time display blinks. While blinking, press preset
button 6
to skip to the nearest half-hour as follows:
–
Example: 3:00
3:29
–
3:30
3:59
.......................................... 1
.............................................. 1, 2, 3
for more than 2 seconds. The time display blinks.
.
.
3:00
4:00
-20-
4
. Press the DISP button
to switch
Advertisement
Table of Contents
