WHAT 'S IN YOUR KIT ?
1x UP Squared 6000 system
Ubuntu 20.04
Intel® Edge Insights for Vision software package
GET READY
The UP Squared 6000 Edge Computing Kit comes
with passive cooling, RTC battery, onboard RAM
and eMMC.
The system comes with Ubuntu 20.04 Desktop
including the Intel® Edge Insights for Vision
software package.
Please follow these steps carefully before connecting
cables and powering ON the system.
SETUP DETAILS
1. Connect the monitor with the system powered down.
2. Power up the system. The system will turn on automatically and boot into the OS.
3. Log in to the Ubuntu 20.04 OS with the following credentials:
username:
devkit
password:
devkit
- If proxy settings are required, you can set them from:
System Settings > Network > Network Proxy
4. Get Started with Intel® Edge Insights for Vision
https://www.intel.com/content/www/us/en/developer/articles/training/devkit-gsg21.html
This is a high performance system and may get hot during operation.
Caution:
Quick Start Guide
UP Squared 6000 Edge Computing Kit
Up to 1.7x improvement in single-thread performance
and up to 2x performance for 3D graphics compared
I/O interfaces include 1x USB 3.2 Type-C (OTG support), 2x USB 3.2 Type-A, 1x Micro USB (debug port),
1x M.2 2230 E key, 1x M.2 2280 M key, 1x M.2 3052 B key with micro-SIM card slot,
1x HDMI 2.0b, 1x DP 1.2, Audio jack line I/O, 1x 40-pin HAT PSE header, 1x 40-pin HAT header, 4x GbE
1x 12V6A (72W) Power Supply
1x US power cord
1x EU power cord
with previous generation Intel processors.
2x COM ports, 2x SATA 3.0, 1x full sized Mini-Card slot (via USB 2.0),
You will need to have the following:
A monitor with HDMI or DP, and respective cables.
USB keyboard and mouse.
Ethernet cable or WiFi module (optional, to be installed manually).
UP AI Core XM 2280 M.2 module (optional for UPN-EDGE-EHLX-
4RE-A10-0864-FDK, to be installed manually).
* UPN-EDGE-EHLX4RE-A10-FDKAI comes with XM 2280 installed (2x Intel® Movidius™ Myriad™ X)
CONNECT HARDWARE
1. Connect Ethernet
2. Connect Monitor
3. Connect your
cable
USB devices
4. Connect Power