Aaeon AHP-1154 Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Desktop
  5. AHP-1154
  6. Manual

Aaeon AHP-1154 Manual

Touch panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T o u c h P a n e l P C
A H P - 1 1 5 4
AHP-1154
®
®
Intel
Celeron
J1900 / N2807 Processor
15" TFT LCD
Touch Panel PC
st
AHP-1154 Manual 1
Ed.
April 16, 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AHP-1154 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon AHP-1154

Summary of Contents for Aaeon AHP-1154

  • Page 1 T o u c h P a n e l P C A H P - 1 1 5 4 AHP-1154 ® ® Intel Celeron J1900 / N2807 Processor 15” TFT LCD Touch Panel PC AHP-1154 Manual 1 April 16, 2015...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 T o u c h P a n e l P C A H P - 1 1 5 4 Acknowledgments All other products’ name or trademarks are properties of their respective owners. • AMI is a trademark of American Megatrends Inc. •...
  • Page 4 A H P - 1 1 5 4 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed:  AHP-1154 Touch Panel PC  Phoenix Terminal Block  Mounting brackets and screws ...
  • Page 5 T o u c h P a n e l P C A H P - 1 1 5 4 Safety & Warranty Please read the following safety instructions carefully. It is advised that you keep this manual for future references Disconnect this device from any AC supply before cleaning.
  • Page 6 T o u c h P a n e l P C A H P - 1 1 5 4 13. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components.
  • Page 7 T o u c h P a n e l P C A H P - 1 1 5 4 This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired...
  • Page 8 T o u c h P a n e l P C A H P - 1 1 5 4 China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI))

  • Page 9: Table Of Contents

    T o u c h P a n e l P C A H P - 1 1 5 4 Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 1.4 Product Overview ............1-7 Chapter 2 Hardware Installation 2.1 Panel-mount Installation ..........
  • Page 10 T o u c h P a n e l P C A H P - 1 1 5 4 B.3 IRQ Mapping Chart ..........B-6 Appendix C Mating Connector C.1 List of Mating Connectors and Cables....C-2 Appendix D Electrical Specifications for I/O Port D.1 Electrical Specifications for I/O Port .....

  • Page 11: Chapter 1 General Information

    T o u c h P a n e l P C A H P - 1 1 5 4 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 12: Introduction

    15" color TFT LCD display, onboard Ethernet controller, and multi-COM port interfaces. With a built-in CFast socket, the AHP-1154 is as compact and user friendly as a multi-function computer. In addition, its "fit anywhere" design makes it very flexible and able to be used in many different kinds of installations.

  • Page 13: Features

    T o u c h P a n e l P C A H P - 1 1 5 4 1.2 Features  15” 450-nits XGA LED Backlight J1900 2GHz/ N2807 1.58GHz Processor ® ®  Intel Celeron  IP65-rated front plastic bezel & back metal chassis ...

  • Page 14: Specifications

    T o u c h P a n e l P C A H P - 1 1 5 4 1.3 Specifications System ® ®  Intel Celeron J1900 2GHz/ N2807 1.58GHz Processor  System Memory 204-pin DDR3L 1333MHz SODIMM x 1, up to 8GB (J1900)/ 4GB (N2807) 2GB build-in system RAM ...
  • Page 15 T o u c h P a n e l P C A H P - 1 1 5 4 Mechanical  Construction IP65-rated front plastic bezel and back metal chassis  Mounting Panel, VESA 75/100  Dimension 16.02” (W) x 12.22” (H) x 2.3” (D) (407mm x 310.5mm x 58.3mm) ...
  • Page 16 T o u c h P a n e l P C A H P - 1 1 5 4  Display Type 15” XGA TFT LCD  Max. Resolution 1024x768  Max. Colors 16.8M (8-bit/color)  Luminance (cd/m 450 nits ...

  • Page 17: Product Overview

    T o u c h P a n e l P C A H P - 1 1 5 4 1.4 Product Overview Chapter 1 General Information...
  • Page 18 T o u c h P a n e l P C A H P - 1 1 5 4 1- 8 Chapter 1 General Information...

  • Page 19: Chapter 2 Hardware Installation

    T o u c h P a n e l P C A H P - 1 1 5 4 Chapter Hardware Installation Chapter 2 Quick Installation Guide...

  • Page 20: Panel-Mount Installation

    T o u c h P a n e l P C A H P - 1 1 5 4 2.1 Panel-mount Installation To mount the panel onto a wall, you will need a strong mounting surface, screws along with the mounting brackets. Please take a look at the illustration below before starting to mount the panel.
  • Page 21 T o u c h P a n e l P C A H P - 1 1 5 4 Step 3: Insert a screw through each of the mounts Step 4: There is a funnel-shaped track inside each of the mount holes on the panel.

  • Page 22: Com 1/4 (D-Sub 9)

    T o u c h P a n e l P C A H P - 1 1 5 4 2.2 COM 1/4 (D-SUB 9) Pin Name Signal T ype Signal Level ±9V ±9V ±9V 2.3 COM 2/3 (D-SUB 9) RS-232 Pin Name Signal T ype...
  • Page 23 T o u c h P a n e l P C A H P - 1 1 5 4 ±5V RI/ +5V/ +12V IN/ PWR +5V/ +12V RS-422 Pin Name Signal T ype RS422_TX- RS422_TX+ RS422_RX+ RS422_RX- NC/ +5V/ +12V RS-485 Pin Name Signal T ype...

  • Page 24: Hard Disk Drive Installation

    T o u c h P a n e l P C A H P - 1 1 5 4 2.4 Hard Disk Drive Installation Step 1: Remove the rear cover Step 2: Remove the HDD bracket Step 3: Place the HDD onto the bracket. Tighten the screws to secure Step 4: Connect the SATA cable to the HDD Step 5: Tighten the screws to secure the assembly to the chassis Step 6: Close and secure the rear cover...
  • Page 25 T o u c h P a n e l P C A H P - 1 1 5 4 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 26: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The AHP-1154 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 27: Ami Bios Setup

    T o u c h P a n e l P C A H P - 1 1 5 4 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 28 T o u c h P a n e l P C A H P - 1 1 5 4 BIOS Setup Menu Setup submenu: Main Press “Delete” to enter Setup Chapter 3 AMI BIOS Setup 3-4...
  • Page 29 T o u c h P a n e l P C A H P - 1 1 5 4 Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 30 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Power Management Options summary: Power Mode ATX Type Optimal Default, Failsafe Default AT Type Select power supply mode Restore AC Power Off Power Loss...
  • Page 31 T o u c h P a n e l P C A H P - 1 1 5 4 Enable ACPI Enable Auto Disable Optimal Default, Failsafe Default Configuration Enables or Disables BIOS ACPI Auto Configuration Enable Enable Optimal Default, Failsafe Default Hibernation Disable Enables or Disables System ability to Hibernate (OS/S4 Sleep State).
  • Page 32 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Power Management -> S5 RTC Wake Settings Options summary: Wake system with Fixed Time Enable Disable Optimal Default, Failsafe Default Wake up hour Wake up minute 0 Wake up second 0...
  • Page 33 T o u c h P a n e l P C A H P - 1 1 5 4 Wake up minute increase Select RTC wake mode Advanced -> Super IO Configuration Chapter 3 AMI BIOS Setup 3-9...
  • Page 34 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Super IO Configuration Serial Port 1 Configuration Chapter 3 AMI BIOS Setup 3-10...
  • Page 35 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Super IO Configuration Serial Port 2 Configuration Chapter 3 AMI BIOS Setup 3-11...
  • Page 36 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Super IO Configuration Serial Port 3 Configuration Chapter 3 AMI BIOS Setup 3-12...
  • Page 37 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Super IO Configuration Serial Port 4 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 38 T o u c h P a n e l P C A H P - 1 1 5 4 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Allows BIOS to Select Serial Port resource. Change Settings Auto Default (Serial Port 2) IO=2F8h;...
  • Page 39 T o u c h P a n e l P C A H P - 1 1 5 4 IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; Working model RS232 Default RS422 RS485 Select Working model Change Settings Auto Default...
  • Page 40 T o u c h P a n e l P C A H P - 1 1 5 4 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; Advanced -> H/W Monitor Chapter 3 AMI BIOS Setup 3-16...
  • Page 41 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> CPU Configuration Options summary: Intel Disabled Optimal Default, Failsafe Default Virtualization Enabled Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vander pool Technology Chapter 3 AMI BIOS Setup 3-17...
  • Page 42 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> CPU Configuration Socket 0 CPU Information Chapter 3 AMI BIOS Setup 3-18...
  • Page 43 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> IDE Configuration Options summary: Serial-ATA(SATA) Enabled Default Disable SATA Speed Support Gen1 Gen2 Default SATA ODD Port Port0 ODD Port1 ODD No ODD Default...
  • Page 44 T o u c h P a n e l P C A H P - 1 1 5 4 IDE: Configure SATA controllers as legacy IDE AHCI: Configure SATA controllers to operate in AHCI mode Serial-ATA Port0/1 Enabled Default Disable SATA Port0/1 HotPlug Enabled...
  • Page 45 T o u c h P a n e l P C A H P - 1 1 5 4 Disable Boot option filter UEFI and Default Legacy Legacy only UEFI only Storage & Video Do not launch Default UEFI only Legacy only Legacy first UEFI first...
  • Page 46 T o u c h P a n e l P C A H P - 1 1 5 4 Advanced -> Trusted Computing Options summary: Security Device Enabled Default Support Disable TPM State Enabled Default Disable Pending Operation None Default Enable Take Ownership...
  • Page 47 T o u c h P a n e l P C A H P - 1 1 5 4 TPM Clear Advanced -> USB Configuration Options summary: Legacy USB Support Enabled Optimal Default, Failsafe Default Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.
  • Page 48 T o u c h P a n e l P C A H P - 1 1 5 4 Type) Floppy Forced FDD Hard Disk CDROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive.
  • Page 49 T o u c h P a n e l P C A H P - 1 1 5 4 Chipset Chapter 3 AMI BIOS Setup 3-25...
  • Page 50 T o u c h P a n e l P C A H P - 1 1 5 4 Chipset -> Host Bridge Primary Boot Display VBIOS Default Default DP/HDMI Chapter 3 AMI BIOS Setup 3-26...
  • Page 51 T o u c h P a n e l P C A H P - 1 1 5 4 Chipset -> Host Bridge -> IGD – LCD Control Chapter 3 AMI BIOS Setup 3-27...
  • Page 52 T o u c h P a n e l P C A H P - 1 1 5 4 Chipset -> South Bridge Chapter 3 AMI BIOS Setup 3-28...
  • Page 53 T o u c h P a n e l P C A H P - 1 1 5 4 Chipset -> South Bridge -> USB Configuration Options summary: USB OTG Support PCI mode Default Disable XHCI Mode Enabled Disabled Default Auto Smart Auto...
  • Page 54 T o u c h P a n e l P C A H P - 1 1 5 4 Disabled Chipset -> South Bridge -> PCI Express Configuration Options summary: PCI Express Root Port Disabled 0/1/2/3 Enabled Optimal Default, Failsafe Default Enabling/Disabling PCI Express root ports Hot Plug Disabled...
  • Page 55 T o u c h P a n e l P C A H P - 1 1 5 4 Gen1 Security Setup submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility.
  • Page 56 T o u c h P a n e l P C A H P - 1 1 5 4 which lets you enter a password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password.
  • Page 57 T o u c h P a n e l P C A H P - 1 1 5 4 Boot Options summary: Quiet Boot Disabled Enabled Default En/Disable showing boot logo. Launch i210/i211 PXE Disabled Default OpROM Enabled En/Disable PXE boot for i210/i211 LAN Chapter 3 AMI BIOS Setup 3-33...
  • Page 58 T o u c h P a n e l P C A H P - 1 1 5 4 Exit Chapter 3 AMI BIOS Setup 3-34...

  • Page 59: Chapter 4 Driver Installation

    T o u c h P a n e l P C A H P - 1 1 5 4 Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation...
  • Page 60 T o u c h P a n e l P C A H P - 1 1 5 4 The AHP-1154 comes with a driver disk that contains all drivers and utilities that can help you setup your product.
  • Page 61 T o u c h P a n e l P C A H P - 1 1 5 4 4.1 Installation Insert the AHP-1154 driver disk into the disk drive. And install the drivers from Step 1 to Step 8 in order. Step 1 – Install Chipset Driver 1.
  • Page 62 T o u c h P a n e l P C A H P - 1 1 5 4 Step 4 – Install PenMount Touch 6000 Driver 1. Open the STEP 4 – PenMount Touch 6000 folder and open the Setup.exe file 2.
  • Page 63 T o u c h P a n e l P C A H P - 1 1 5 4 Step 8 – Install Serial Port Driver (Optional) Please follow the instructions in the Step8 - Serial Port Driver (Optional) folder 4 - 5 Chapter 4 Driver Installation...

  • Page 64: Appendix A Programming The Watchdog Timer

    T o u c h P a n e l P C A H P - 1 1 5 4 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 65: Watchdog Timer Registers

    T o u c h P a n e l P C A H P - 1 1 5 4 A.1 Watchdog Timer Registers Table 1 : Watch dog relative IO address I/O Base Default Value Note Address 0xA00 I/O Base address for Watchdog operation. This address is assigned by SIO LDN7, register 0x60‐0x61.
  • Page 66 T o u c h P a n e l P C A H P - 1 1 5 4 Counting Unit 0x05 Select time unit. 0: second 1: minute Output Signal 0x05 0: Level Type 1: Pulse Must set this bit to 1 Watchdog 0x05 0: Disable...

  • Page 67: Watchdog Sample Program

    T o u c h P a n e l P C A H P - 1 1 5 4 A.2 Watchdog Sample Program *********************************************************************// WDT I/O operation relative definition (Please reference to Table 1) #define WDTAddr 0xA00 // WDT I/O base address Void WDTWriteByte(byte Register, byte Value);...
  • Page 68 T o u c h P a n e l P C A H P - 1 1 5 4 ********************************************************************* VOID Main(){ // Procedure : AaeonWDTConfig // (byte)Timer : Counter of WDT timer.(0x00~0xFF) // (boolean)Unit : Select time unit(0: second, 1: minute). AaeonWDTConfig(Counter, Unit);...
  • Page 69 T o u c h P a n e l P C A H P - 1 1 5 4 byte TmpValue; TmpValue = WDTReadByte(Register); TmpValue &= ~(1 << Bit); TmpValue |= Val << Bit; WDTWriteByte(Register, TmpValue); ********************************************************************* Appendix A Programming the Watchdog Timer A-6...

  • Page 70: Appendix B I/O Information

    T o u c h P a n e l P C A H P - 1 1 5 4 Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 71: I/O Address Map

    T o u c h P a n e l P C A H P - 1 1 5 4 B.1 I/O Address Map B - 2 Appendix B I/O Information...
  • Page 72 T o u c h P a n e l P C A H P - 1 1 5 4 B - 3 Appendix B I/O Information...

  • Page 73: Memory Address Map

    T o u c h P a n e l P C A H P - 1 1 5 4 B.2 Memory Address Map B - 4 Appendix B I/O Information...
  • Page 74 T o u c h P a n e l P C A H P - 1 1 5 4 B - 5 Appendix B I/O Information...
  • Page 75 T o u c h P a n e l P C A H P - 1 1 5 4 B.3 IRQ Mapping Chart B - 6 Appendix B I/O Information...
  • Page 76 T o u c h P a n e l P C A H P - 1 1 5 4 B - 7 Appendix B I/O Information...
  • Page 77 T o u c h P a n e l P C A H P - 1 1 5 4 B - 8 Appendix B I/O Information...
  • Page 78 T o u c h P a n e l P C A H P - 1 1 5 4 B - 9 Appendix B I/O Information...
  • Page 79 T o u c h P a n e l P C A H P - 1 1 5 4 B - 10 Appendix B I/O Information...
  • Page 80 T o u c h P a n e l P C A H P - 1 1 5 4 B - 11 Appendix B I/O Information...
  • Page 81 T o u c h P a n e l P C A H P - 1 1 5 4 Appendix Mating Connector C - 1 Appendix C Mating Connector...
  • Page 82 Input and PS_ON# SATA SATA Molex 887505318 1709070500 Connector Cable +12V Vin Power Molex 19211-0003 170204010R Connector Cable LVDS HIROSE DF13-30DS-1.25C Connector Audio Audio Molex 51021-1000 1709100254 Connector Cable AAEON CN11 SHR-12V-S-B 1703120130 Connector C - 2 Appendix C Mating Connector...
  • Page 83 T o u c h P a n e l P C A H P - 1 1 5 4 Cable COM Port Serial CN12 Molex 51021-0900 1701090150 Port Connector Cable Parallel CN13 Molex 51110-2650 1701260200 Port Connector Cable COM Port Serial CN14 Molex...
  • Page 84 T o u c h P a n e l P C A H P - 1 1 5 4 Appendix Electrical Specifications for I/O Port Appendix D Electrical Specifications for I/O Port D-1...
  • Page 85 T o u c h P a n e l P C A H P - 1 1 5 4 D.1 Electrical Specifications for I/O Port Reference signal name Rate output LVDS Port Inverter / Backlight +5V/+12V +5V/1.5A or +12V/1.5A Connector +5V Output for SATA HDD +5V/1A...

Table of Contents