Operation - Klarstein CLARA Manual

OPERATION

Getting Started
After you have inserted the mains plug of the cooker hood into the socket, the
backlight of all buttons goes on and the appliance beeps once. The LED screen
is switched off. The cooker hood is not in operation and goes into standby mode.
Control panel and button functions
1 On/Off
2 Light
3 Fan-
Stage
When you press this button, the cooker hood starts
operating at low fan speed and the display shows
"1". If you press the button again, the cooker hood
stops operating.
• The fan speed of the cooker hood can only be
adjusted if the On/Off button has been pressed
beforehand.
• After switching off the cooker hood with the On/
Off button, press the On/Off button again to switch
the appliance on again. The fan speed that was set
before switching off is restored.
When you press this button, the backlight of this
button and the light go on. When you press the
button again, the backlight goes out and the light
is switched off. The light can be switched on and
off while the cooker hood is in operation and works
independently of the on/off button.
The cooker hood has 3 different fan speeds: low (1),
medium (2) and high (3). The corresponding indication
"1", "2" or "3" appears on the display.
• After the appliance has been switched on, the
cooker hood starts operating at the lowest fan level
and the display shows "1".
EN
31