Operation - Klarstein AVA 60 SMART Manual

EN
38
It is recommended to switch on the appliance a few minutes before starting to
cook. To improve the performance of the cooker bonnet, you should pull out the
steam collector (if present). Set the power level according to the amount of steam
and odour to be extracted. Leave the cooker bonnet running for approx. 5 to 10
minutes after cooking. This frees the kitchen air from residual vapours and odours.

OPERATION

Control panel
Button functions
On / off button
Light button
• Briefly press this button to switch the light on or off
• Adjust the colour temperature (Kelvin): Press and hold this button in
operating mode/standby mode to adjust the Kelvin value. In Kelvin
adjustment mode, the light button flashes. Press "1" briefly to adjust
the Kelvin value (Kelvin value from 280 K to 6500 K). There are a total
of 6 adjustment levels.
• The brightness can be adjusted by briefly pressing the WLAN key.
There are a total of 3 brightness settings: 100 %, 75 % or 50 %, which
are cycled through by pressing the WLAN button several times.
Level 1 - low speed
Level 2 - medium speed
Level 3 - high speed
Booster function
• After 5 minutes, the speed automatically changes to level 3.