R.G.V. Fresh Quality Led Instruction Manual page 21

5. Pulse:
Pulse vacuum function. Use this function to obtain customized vacuum,
in case of fragile products that could be crushed by automatic function.
When desired vacuum is reached, manual welding can be operated
with "2. Seal" switch.
BE CAREFUL: VACUUM LEVEL COULD BE LOWER THAN NECES-
SARY TO GUARANTEE CORRECT FOOD PRESERVATION. PRES-
ERVATION TIME COULD BE LOWER THAN EXPECTED.
6. Sealing
Used for choosing the best bag seal time:
Dry LED: for dry bags and items without moisture, with a shorter
-
heat sealing time;
- Moist LED: for wet bags or foods with moisture, with an extended
heat sealing time.
- Extended LED: used for larger vacuum bags, to extend the pump/
vacuum length longer.
>> Default setting is Dry sealing time.
7. Pressure
For choice of different vacuum pressure:
- High LED
For regular items storage in normal vacuum pressure;
- Gentle LED
For some soft & crushable items storage where less vacuum pres-
sure is desired.
>> Default setting is High.
8. Cycle LED
- Indicates the status of vacuum or seal process.
- Indicates that the device is on and the cover is closed.
When the LED flashes, wait for it to stop in order to proceed with
the next setting.
9. Hose Port:
To insert the hose for canister and wine stopper.
10. Handle:
Press the handle to lock the cover into the base very easily. When han-
dle is unlocked, functions of switches are inactivated.
EN
21