Table of Contents
Advertisement
S Y S T E M M E N U
Temperature Infomation: In this submenu you are able to check the fixture's current running
temperature.
1. Plug the fixture in and press the UP or DOWN buttons until "Info" is displayed.
2. Press the ENTER button and press the UP or DOWN buttons until "TempInfo" is displayed. Press
ENTER.
3. Use the UP or DOWN buttons to find the time information you would like to check. Press the
ENTER button to access your desired time information.
Software Infomation: In this submenu you are able to check the fixture's current software.
1. Plug the fixture in and press the UP or DOWN buttons until "Info" is displayed.
2. Press the ENTER button and press the UP or DOWN buttons until "Software" is displayed, then
press ENTER.
3. The current software version will now be displayed. Press the MODE button to exit.
Manual Dimmer Mode:
1. Plug the fixture in and press the UP or DOWN buttons until "Menu Manual" is displayed, then
press ENTER.
2. "ManCtrl Dimmer" will be displayed. Press the ENTER button to access the dimmer adjustment
submenu.
3. Use the UP and DOWN buttons to adjust the dimmer intensity. When you are finished adjusting
the intensity, press ENTER.
4. Press the UP or DOWN buttons to switch to "ManCtrl Strobe" and press ENTER. Follow the val-
ues listed under the "DMX Strobe" channel in the DMX Traits section of this manual.
17
Advertisement
Table of Contents
