Hide thumbs Also See for Acclaim LED PLE:

Advertisement

Quick Links

AcclAim lED PlE
User ManUal

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Acclaim LED PLE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Strand Acclaim LED PLE

  • Page 1 AcclAim lED PlE User ManUal...
  • Page 2: Additional Documentation

    Strand website at www.strandlighting.com. This User Manual provides necessary information regarding safety, installation, operation and routine mainte- nance for Strand VL2600 Series. Familiarizing yourself with this information will help you to get the most out of your product.
  • Page 3: Safety Warnings And Notices

    AcclAim lED PlE UsEr mAnUAl SAFETY WARNINGS AND NOTICES Read this user manual in full before attempting to install, operate or maintain the fi xture to which it relates. This user manual is intended to provide general guidance to such suitably qualifi ed personnel. Installation and opera- tion of the fi...
  • Page 4: Compliance Notice

    This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with Vari-Lite Strand system, service, and safety guidelines, may cause harmful interference to radio communications.
  • Page 5: How To Obtain Warranty Service

    As stated in the warranty, it is required that the shipment be insured and FOB our service center. IMPORTANT! When returning products to Vari-Lite Strand for repairs (warranty or out-of-warranty) from a country other than the USA, “Vari-Lite LLC”, must appear in the address block as the Importer of Record (IOR) on all shipping documentation, Commercial Invoices, etc.
  • Page 6 The document provides installation and operation instructions for the following products: • Strand Acclaim LED PLE every strand product is backed by a minimum 2-year limited warranty against manufacturing defects and workmanship. refer to the strand limited Warranty Card available at Read all instructions before installing or using this product.
  • Page 7: Installation

    This document provides basic setup instructions and safety warnings for the following product(s): AcclAim lED PlE UsEr mAnUAl PowEr POWER CONNECTOR connEctor acclaim leD Ple (black body) 64511-003 912400576889 QUICK START GUIDE QUicK stArt (this document) wArrAntY gUiDE 2  acclaim leD Ple (white body)
  • Page 8 AcclAim lED PlE UsEr mAnUAl GOBO HOLDER INSTALLATION acclaim leD Ple gobo holder (B-size) 912400576897 64511-012 To install the gobo holder: Step 1. Loosen the two screws at A and move the shading plate backward Tighten the two screws to fix it.
  • Page 9: Connecting Data And Power

    AcclAim lED PlE UsEr mAnUAl CONNECTING DATA AND POWER A maximum of 32 luminaires may be connected in any one DMX data link. A maximum of 9 luminaires may be connected in 120V, 60Hz. A maximum of 16 luminaires may be connected in 230V, 50Hz.
  • Page 10: Menu Operation

    Always ensure that the structure to which you are attaching AcclAim lED PlE UsEr mAnUAl the unit is secure and is able to support 10 times the unit’s weight. Always use a safety cable that can hold up to 12 times the weight of the unit when installing the fi xture.
  • Page 12: Manual Menu

    AcclAim lED PlE UsEr mAnUAl NOTE: Not all menu options are available for every fi xture. DMX MENU Choose DMX, press the ENTER button to confirm, use the UP/DOWN button to choose from options listed. ADDRESS Choose Address, press the ENTER button to confirm. Use the UP/DOWN button to select range of values. Press the ENTER button to store.
  • Page 13 AcclAim lED PlE UsEr mAnUAl OUTPUT MODe Choose Output Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Standard, Studio, or Whisper. Press the MENU button to return to previous menu. COlOr CalIBraTIOn Choose Color Cal, press the ENTER button to confirm. Use the UP/DOWN button to Choose ON or OFF. Press the MENU button to return to previous menu.
  • Page 14 AcclAim lED PlE UsEr mAnUAl NOTE: Incoming DMX must be removed from the fixture or software crossload will not be activated. PASSWORD Select Password(2606), press the ENTER button to confirm. Use the UP/DOWN button to select White Balance or Change Mode, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
  • Page 15: Dmx Mapping

    AcclAim lED PlE UsEr mAnUAl 4  DMX MaPPInG The fixture can be operated by DMX controller. The following tables assumes a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in se- quence.
  • Page 16 AcclAim lED PlE UsEr mAnUAl COLOR PRESET CCT TARGET CRI (RA) 2700K 85.5 3200K 83.6 4500K 85.9 5600K 6500K 85.9 7000K 84.6 7103K 85.6 w w w. s t r A n D l i g h t i n g .c o m...
  • Page 17 This protocol will allow configuration, status monitoring, and management of these devices in such a way that does not disturb the normal operation of standard DMX512 devices that do not recognize the RDM protocol. ACCLAIM LED PLE RDM PRODUCT PARAMETER IDS Model ID...
  • Page 18 AcclAim lED PlE UsEr mAnUAl w w w. s t r A n D l i g h t i n g .c o m...
  • Page 22: Care And Maintenance

    AcclAim lED PlE UsEr mAnUAl Appendix A  CARE AND MAINTENANCE TROUBLeSHOOTinG The following are a few common problems that may occur during operation. The unit does not work; light and fan do not turn on • Check the connection of power and main fuse.
  • Page 23: Fan Speed And Control

    Appendix B  FAN SPEED AND CONTROL All Vari-lite and Strand lighting luminaires are governed by the same fan speed versus noise levels and maximum power output rules as detailed below. The noise related to these levels conforms to noise criteria levels detailed within the document.
  • Page 24: Technical Support

    Signify. Data subject to change. vls_copyright ACCLAIM LED PLE USER MANUAL W W W. S T R A N D L I G H T I N G . C O M VERSION DATE:...

Table of Contents