Bosch Zamo Original Instructions Manual page 36

36 | English
Cause
Display shows "----", measurement not possible
Measuring range exceeded
(20 m)
or
poor measuring conditions
Fitting the Adapter (see figures E, H,
J)
– Remove the cover cap (9) from the measuring tool.
– Attach the adapter to the laser measure so that it clicks into
place.
– To remove the adapter, press the release buttons (10) and
take off the adapter.
– Reattach the cover cap to the measuring tool.
Digital laser measure with laser line
adapter
Operation
Activating the laser line
– Switch on the measuring tool (see "Switching the laser
measure on/off", page 33).
– To show the laser line, briefly press the measuring button
(1). The indicator flashes on the display.
Do not direct the laser beam at persons or animals and
u
do not stare into the laser beam yourself (even from a
distance).
1 609 92A 7L5 | (05.05.2022)
Remedy
the adapter to the after-sales
service.
Keep the measuring range
< 20 m and observe the notes
on the measuring range
Bosch Power Tools