Set Date/Time - AT&T DLP73290 Complete User's Manual

Telephone settings
Telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. You can turn off
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page 59).
After a power failure, the system prompts you to set the date and time.
To set the date and time manually:
MENU
1. Press
2. Press or
Set date / time
3. Use the dialing keys (0-9) to enter the month (--), date (--) and year (--).
Then, press Next
4. Use the dialing keys (0-9) to enter the hour (HH) and minute (MM). Then,
press or
Bluetooth
Access
voicemail
Set date / time
Previous
Save
5. Press to save.
Note: If the clock is not set when a message is recorded, the system announces, "Time and day not set," before it
plays the message.
on the telephone base in idle mode to enter the main menu.
to scroll to the next page, and then press the
smart key to enter.
.
to choose AM or PM.
MENU 2/2
Smart key
Ringers
Settings
SET DATE
MONTH DATE
-- / -- / --
Back
54
YEAR
Next