Answering System; Answering System Settings; Announcement - AT&T DLP73290 Complete User's Manual

Answering system

Answering system settings

Use the answering system menu to set up the announcement message, turn on
or off the answering system or message alert tone, activate call screening, or
change the number of rings, remote access code or message recording time.

Announcement

Your outgoing announcement plays when calls are answered by the answering
system.
The telephone has a default outgoing announcement, "Hello,
please leave a message after the tone." You can use this
announcement, or record your own.
To record a new outgoing announcement:
Using a cordless handset:
MENU/
1. Press
2. Press or
CID
/SELECT
MENU
/SELECT
3. Press
MENU
4. The handset displays Play [2] Del [3] Rec [7] and it
announces, "To play, press 2. To record, press 7." Press 7 to
record. The handset announces, "Record after the tone.
Press 5 when you are done."
5. After the tone, speak towards the handset or telephone
base microphone. Press 5 to end recording. The newly
recorded announcement automatically plays.
To listen to the recorded announcement again on the
handset, wait after playback has completed, then press 2.
Using the telephone base:
1. Press Menu
Outgoing announcement
2. Press
MENU
Answering
system
Directory
Caller ID log
in idle mode.
SELECT
to scroll to Answering sys, then press
DIR
.
to select Announcement.
softkey, and choose
1/2
Smart call
blocker
Block list
Intercom
Next
Answering system
.
ANSWERING SYSTEM
Message
Delete all old
list
Outgoing
Record memo
announcement
Voice guide Answer ON/OFF
145
Answering sys
ECO
Announcement
ECO
Play Del
[2] [3]
ECO
Recording... Stop
ECO
.
1/2
Next
Rec
[7]
[5]