Set Up System Features; Feature Setup; Set The Time And Date - AT&T 1760 User Manual

SET UP SYSTEM FEATURES

Feature Setup

You can set up one feature at a time, or you can set up a feature and then move on to set
up another feature. After you change one feature, use the softkey to select OK to move to
another feature. If you change only one feature, you can continue to select OK until the
screen exits the Feature Setup mode.
NOTE: If the unit does not receive a command within 30 seconds, it automatically
exits the Feature Setup mode.

Set the Time and Date

The system automatically resets the time and date each time new call information is
received. However, you must manually set the time and date once for the day announced
with your messages to be correct.
1 Press o.
2 Use the softkey to select CLOCK.
3 Press C or c to change the hour setting.
4 Select NEXT to move to the minutes setting.
5 Press C or c to change the minutes setting.
6 Select NEXT to move to AM or PM.
7 Press C or c to change the setting.
8 Select DONE.
9 Press C or c to change the month setting.
10 Select NEXT to move to the day setting.
11 Press C or c to change the day setting.
12 Select NEXT to move to the year setting.
13 Press C or c to change the year setting.
14 Select DONE.
NOTE: You can select DONE to exit without changing a setting.
8