Remote Access Code - AT&T DLP73290 Complete User's Manual

Answering system
Answering system settings

Remote access code

To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access
code is 19. See Answering system remote access on page 161.
To change the remote access code:
Using a cordless handset:
1. Press MENU/
2. Press or
CID
/SELECT
MENU
3. Press or
CID
/SELECT
MENU
4. Press or
CID
/SELECT
MENU
5. Use the dialing keys to enter a two-digit number.
-OR-
Press or
CID
/SELECT
6. Press
MENU
Using the telephone base:
1. Press Menu
2. Press / / /
Remote code
3. Use the dialing keys to enter a two-digit number.
Save
4. Press to confirm.
in idle mode.
SELECT
to highlight Answering sys, then press
DIR
.
to highlight Ans sys setup, then press
DIR
.
to highlight Remote code, then press
DIR
.
to scroll to a desired two-digit number.
DIR
to confirm.
softkey, and choose
to scroll to the next page, and then select
.
Answering system
151
Remote code
ECO
Remote code
ECO
.
19