Printing Cad Drawings; Printing Using Cad/Line Drawing Mode In The Printer Driver - Epson SC-P8500D Series User Manual

SC-P8500D Series/SC-T7700D Series

Printing CAD Drawings

This printer supports HP-GL/2 and HP RTL used for
plotter printing. You can use either of the following
methods to print CAD drawings on this printer.
❏ Print using the CAD/Line Drawing mode in the
supplied printer driver.
❏ Print using HP-GL/2 and HP RTL emulation
used for plotter printing.
The printer automatically switches between normal
printing and HP-GL/2 or HP RTL emulation printing
based on the print data it receives. However, if mode
switching is not performed correctly and printing is
not performed properly, set the General Settings -
Printer Settings - Language - Network to HP-GL/2.
Printing Using CAD/Line
Drawing Mode in the Printer
Driver
When printing CAD drawings from a Windows
application, we recommend printing using the CAD/
Line Drawing mode in the printer driver.
Windows
A
Display the printer driver's Printer Settings
screen, and then make the following settings.
SC-P8500D Series
Select Select Target in Print Quality, and then
select Standard. In Print Mode select Print
Mode, Black, or Black (Bi-Level).
User's Guide
Various Printing Methods
B
Mac
A
86
SC-T7700D Series
Select Select Target in Print Quality, and then
select CAD/Line Drawing - Black, CAD/Line
Drawing - Color, or CAD/Line Drawing -
Bi-Level.
Note:
CAD/Line Drawing - Black, CAD/Line
Drawing - Color, CAD/Line Drawing - Bi-Level
are displayed as selections in Select Target when
a suitable paper type for printing CAD drawings
is selected.
Check other settings, and then start printing.
Display the Print screen, and then select
Printer Settings from the list.
"Basic Printing Methods(Mac)" on page 68
U