Removing Method For Auto Take-Up - Epson SC-P8500D Series User Manual

SC-P8500D Series/SC-T7700D Series
Q
Press the pause/resume button, and then use
the take-up direction switch to select either
printed side in or printed side out.
After selecting the take-up direction, press the
pause/resume button.
R
Press Feed to Take-up Position to feed the
paper to the take-up position.
S
Use Backward and Forward to adjust the
length of paper required for the take-up loading.
T
Cut the leading edge of the paper as shown.
User's Guide
Basic Operations
U
V
W
X
Removing Method for Auto
Take-up
A
63
Check the take-up direction and attach the end
of the paper to the roll core.
Printed side out
Printed side in
Press and hold Forward on the control panel to
feed the roll paper about one revolution of the
take-up roll core.
Press and hold the Manual take-up button to
wind the roll paper once around the roll core.
Press Complete.
Select Paper Setting - Roll 2 - Feed/Cut Paper
and adjust the cutting position to cut the roll
paper.