Removing Roll 2 - Epson SC-P8500D Series User Manual

SC-P8500D Series/SC-T7700D Series
K
Return the roll2 unit.
L
Lower the spindle lock lever.
M
When printing a single sheet, pull out the paper
basket.
N
Make the paper settings.
"Setting Loaded Paper" on page 53
U

Removing Roll 2

This section describes how to remove the roll paper
from the printer after printing. If the roll paper is not
cut, select Menu - Paper Setting - Roll 2 - Feed/Cut
Paper and adjust the cutting position to cut the roll
paper.
User's Guide
Basic Operations
c
Do not pull out the roll2 unit while the paper is
loaded.
Otherwise, the paper may wrinkle when you
return the roll2 unit after it has been pulled out.
When returning the unit, slowly return the roll2
unit while taking-up the paper.
A
B
45
Important:
If the paper basket is pulled out, remove the
printing paper and store the paper basket.
Select Menu - Paper Setting - Roll 2 - Remove.
Note:
You can also eject the roll paper by pressing the
Roll2 removal button.